Please enable Javascript to continue to Phidgets.com
This encoder interface can measure 100,000 quadrature cycles per second at 50 Hz.
This affordable unipolar stepper has a 7.5° step angle and 50 g·cm of torque at low speeds.
Add 16 PWM-enabled solid state relay outputs to your hub. This module is isolated from input to output.
This compact Stepper Phidget gives you control of one bipolar stepper motor from a port on your VINT hub.
Measure up to 20 amps DC or ±20 amps AC with this current sensor. Separate outputs for AC and DC components connect to a Voltage Input.
Control a single DC motor up to 2A with this compact and affordable Phidget. Connects to a VINT port.
This bipolar stepper with planetary gearbox has a 0.067° step angle and 30 kg·cm of torque at low speeds.
This bipolar stepper with planetary gearbox has a 0.347° step angle and 16.2 kg·cm of torque at low speeds.
This bipolar stepper with planetary gearbox has a 0.018° step angle and 48 kg·cm of torque at low speeds.
This powerful bipolar stepper has a 0.067° step angle and 40 kg·cm of torque at low speeds.
This powerful bipolar stepper has a 0.35° step angle and 24.86 kg·cm of torque at low speeds.
This powerful bipolar stepper has a 0.018° step angle and 50 kg·cm of torque at low speeds.
Connect up to four K, J, E or T type thermocouples to this Phidget to measure the temperature of the air or an object.
Measure up to 50 amps DC or ±50 amps AC with this current sensor. Separate outputs for AC and DC components connect to a Voltage Input.
This powerful bipolar stepper has a 1.8° step angle and 30 kg·cm of torque at low speeds.
This massive bipolar stepper with a rear shaft has a 1.8° step angle and over 100 kg·cm of torque at low speeds.
This affordable unipolar stepper has a 7.5° step angle and 710 g·cm of torque at low speeds.
This absolute air pressure sensor plugs into an Analog Input or VINT Hub port and measures pressure from 20 kPa to 400 kPa.
This SSR switches up to 120VAC/20amp and connects to a PhidgetInterfaceKit 0/16/16.
This SSR switches up to 120VAC/50amp and connects to a PhidgetInterfaceKit 0/16/16.
This SSR switches up to 280VAC / 25A and connects to a PhidgetInterfaceKit 0/16/16 or OUT1100.
This sensor measures up to 100mA DC and connects to a Voltage Input.
This sensor measures up to 1A DC and connects to an Analog Input or VINT Hub port.
Measure AC active power up to 7500W at 50Hz with this sensor. Connects to a Voltage Input.
Measure AC active power up to 7500W at 60Hz with this sensor. Connects to a Voltage Input.
Measure AC active power up to 1250W at 50Hz with this sensor. Connects to a Voltage Input.
Ideal for mains voltage, this sensor measures up to 250V AC at 50Hz. Connects to an Analog Input or VINT Hub port.
Ideal for mains voltage, this sensor measures up to 250V AC at 60Hz. Connects to an Analog Input or VINT Hub port.
This sensor measures up to 200 volts DC and connects to an Analog Input or VINT Hub port.
This sensor measures up to 200 volts DC and connects to a Voltage Input.
This sensor measures up to 75 volts DC and connects to a Voltage Input.
This bi-directional current transducer measures ±50 amps DC on a wire that passes through its window.
This current transducer measures up to 50 amps DC on a wire that passes through its window.
This SSR switches up to 120VDC / 25A and connects to a PhidgetInterfaceKit 0/16/16 or OUT1100.
This differential air pressure sensor plugs into a Voltage Input and measures pressure from -25 kPa to 25 kPa.
This differential air pressure sensor plugs into an Analog Input or VINT Hub port and measures pressure from -2 kPa to 2 kPa.
This differential air pressure sensor plugs into an Analog Input or VINT Hub port and measures pressure from 0 kPa to 100 kPa.
Like a digital tape measure, this 500mm draw wire encoder measures the length of wire pulled out of it.
Like a digital tape measure, this 600mm draw wire encoder measures the length of wire pulled out of it.
Like a digital tape measure, this 1500mm draw wire encoder measures the length of wire pulled out of it.
Like a digital tape measure, this 1m draw wire encoder measures the length of wire pulled out of it.
Like a digital tape measure, this 2500mm draw wire encoder measures the length of wire pulled out of it.
Like a digital tape measure, this 2m draw wire encoder measures the length of wire pulled out of it.
Like a digital tape measure, this 500mm draw wire potentiometer measures the length of wire pulled out of it.
Like a digital tape measure, this 1m draw wire potentiometer measures the length of wire pulled out of it.
Like a digital tape measure, this 2m draw wire potentiometer measures the length of wire pulled out of it.
This board has 2 SPDT mechanical relays rated at 210W for DC or 1750VA for AC.
This board has 2 SPDT mechanical relays rated at 240VAC/10amp or 100VDC/5amp.
A convenient way to plug your power supply into any circuit. 5.5x2.1mm female connector.
Designed for aluminum structures, this strain gauge comes in the full-bridge configuration.
Designed for steel structures, this strain gauge comes in the full-bridge configuration.
Write text and draw pictures to this 128x64px graphic LCD display that connects to a VINT port.
Designed for aluminum structures, this strain gauge comes in the half-bridge configuration.
Designed for aluminum structures, this strain gauge comes in the half-bridge shear configuration.
Designed for steel structures, this strain gauge comes in the half-bridge configuration.
Designed for steel structures, this strain gauge comes in the half-bridge shear configuration.
Ideal for use with motors, this hollow-shaft encoder fits easily onto an 8mm shaft.
Measure relative humidity from 0 to 100% and temperature from -40°C to +85°C.
This board has an ambient humidity sensor and connects to a Voltage Input.
An adapter dongle for the SBC that enables audio input and output.
The i-Snail-S closes an electrical switch when currents greater than 0.15A are detected in the wire that passes through its window.
This inductive sensor can detect metallic objects within 15mm and behaves like a switch that connects to a digital input.
This inductive sensor can detect metallic objects within 4mm and behaves like a switch that connects to a digital input.
This adapter lets you read Sharp distance sensors with a Phidgets Analog Input or VINT Hub port.
Measure the distance of an opaque object up to 4mm away using reflected IR light. Connects to an Analog Input or VINT Hub port.
This IR proximity sensor can detect opaque objects within 10cm and connects to an Analog Input or VINT Hub port.
This IR proximity sensor can detect opaque objects within 10cm and connects to a Voltage Input.
With a range of 5mm, this IR proximity sensor can detect opaque objects and connects to a Voltage Input.
Attach an Omega K-Type thermocouple to this adapter for a convenient way to connect it to a terminal block.
Use this heatsink to run up to two SSRs at full current switching capacity without overheating.
A 2 line by 20 character backlit LCD display. Each character is 2.49x4.62mm.
Measures light intensities of up to 1000 lux and connects to a Voltage Input.
This sonar sensor measures the distance of an object using ultrasonic waves.
Sensing changes in IR light, this sensor detects movement in a small room or hallway and connects to an Analog Input or VINT Hub port.
This tiny bipolar stepper has a 1.8° step angle and 600 g·cm of holding torque.
This tiny bipolar stepper has a 1.8° step angle and 1250 g·cm of holding torque.
This compact bipolar stepper has a 1.8° step angle and 450 g·cm of torque at low speeds.
This high speed bipolar stepper has a 3.75° step angle and 590 g·cm of torque at low speeds.
This affordable bipolar stepper has a 1.8° step angle and 4.24 kg·cm of torque at low speeds.
This precise bipolar stepper has a 0.9° step angle and 4.28 kg·cm of torque at low speeds.
This NEMA-23 bipolar stepper has a 1.8° step angle and 3.58 kg·cm of torque at low speeds.
This precise bipolar stepper has a 0.9° step angle and 9 kg·cm of torque at low speeds.
This powerful bipolar stepper has a 1.8° step angle and 11.06 kg·cm of torque at low speeds.
This high-speed bipolar stepper with a rear shaft has a 1.8° step angle and 11 kg·cm of torque at low speeds.
This encoder can measure rotation at speeds of up to 3000 RPM and plugs into a Phidgets Encoder Interface.
The pH/ORP Adapter connects any of our pH or ORP probes to an Analog Input or VINT Hub port.
Measures the frequency of a signal and powers small devices like Hall Effect sensors, flow rate sensors, and tachometers.
This kit contains a PhidgetInterfaceKit and an assortment of sensors to get started.
A small assortment of sensors, great for experimenting and learning.
With all of our most popular boards bundled together, this is an excellent pack for a first-time Phidgeteer.
With all of our most popular boards bundled together, this is a kit you won't grow out of.
This spatial board had a 2-axis, ±5g accelerometer and connects to your computer via USB.
This spatial board had a 3-axis, ±3g accelerometer and connects to your computer via USB.
Control one RC servo motor or actuator with this controller board. Powered solely by your computer via USB.
Control up to 8 RC servo motors or actuators with this controller board. Connects to your computer via USB.
Everything you need to control 4 servo motors from your PC, with the ability to add another 4 RC servos of your choosing.
Outputs a voltage from -10V to +10V.
This board is needed to measure the output from a load cell. You can connect up to four load cells or strain gauges.
This encoder can be used as a control dial for user input. The centre of the dial is a pushbutton and it connects directly to USB with the included cable.
Read one encoder at speeds of up to 500,000 quadrature cycles per second. Connects directly to USB.
Read up to four encoders simultaneously with this Phidget. Includes 4 digital inputs for reading limit switches.
Read up to four encoders simultaneously with this Encoder Interface. You can read limit switches or other simple sensors with the digital inputs.
Measure global position, velocity and heading with the Phidget GPS. Best case accuracy of 2.5m CEP.
This board has 4 SPDT mechanical relays rated at 210W for DC or 1750VA for AC.
This board has 4 SPDT mechanical relays rated at 250VAC/10amp or 100VDC/5amp.
Control 8 DPDT mechanical relays, switching up to 250VAC/2amp or 200VDC/2amp.
Use it to check the state of switches and push buttons, and/or to switch relays, solenoids, and LEDs.
Use it to check the state of switches, push buttons, relays and/or to switch relays, solenoids, motors and even high power LEDs.
The Phidgets workhorse. Connect sensors, control outputs, and read in digital inputs.
The Phidgets workhorse. Connect analog sensors, control switches, and check on push-buttons. One board handles up to 24 devices.
A 1018 with an on-board 2 port USB Hub.
A 1018 with an on-board powered 6-port full-speed (12Mbit/s) USB hub.
Send and receive IR data with this Phidget. It can learn and reproduce signals from common devices like your TV remote.
This Phidget controls the brightness of up to 64 LEDs.
This Phidget uses current control to adjust the brightness of up to 64 LEDs.
This touch slider recognizes both contact and proximity. Connects directly to a USB port.
Control one motor as well as an encoder and up to 2 analog and 2 digital sensors. Connects to a USB port.
Control up to two DC motors with this controller. Monitors surges and overheating in the API and connects to a USB port.
Control up to two DC motors with this controller.
Control up to two low current DC motors with this controller.
This pH/ORP Adapter connects any of our pH or ORP probes directly to your computer's USB port.
Read EM4100 series RFID tags at a distance of up to 6cm with this reader.
This kit is all you need for reading RFID tags.
Read and write to RFID tags up to 6cm away. Supports EM4100 series, ISO11785 FDX-B and our own PhidgetTag protocols.
Single board computer runing a custom Linux Distro with 64 MiB ram, 64 MiB flash, and 4 full-speed USB ports.
Single board computer running Debian 6.0 with 64 MiB SDRAM, 512 MiB Flash, integrated 1018 and 6 USB 2.0 Full Speed ports.
Single board computer running Debian 7.0 with 128 MiB SDRAM, 1 GiB Flash, integrated 1018 and 6 USB 2.0 ports.
Control up to 4 RC servo motors or actuators with this controller board. Connects to your computer via USB.
This spatial board had a 3-axis, ±5g accelerometer and connects to your computer via USB.
This spatial board has a 3-axis, ±8g accelerometer and connects to your computer via USB.
This spatial board had a 3-axis, ±8g accelerometer and connects to your computer via USB.
This spatial board has a 3-axis accelerometer, gyroscope and compass and connects to your computer via USB.
This spatial board has 3-axis, ±8g accelerometer with high resolution measurements at low magnitudes.
This spatial board has a 3-axis accelerometer, gyroscope and compass with high resolution readings at low magnitudes.
Accurately control one bipolar stepper motor with this controller.
Accurately control one bipolar stepper motor with this controller. This board comes with a number of safety features.
Accurately control up to 4 unipolar stepper motors with this controller. Connects to a USB port.
Read up to four thermocouples via USB with this board to measure the temperature of four different objects. Note: Legacy customers deploying the 1048_0B on Phidget21 please email us at sales@phidgets.com to order.
Read up to four thermocouples via USB with this board to measure the temperature of four different objects.
Connect a thermocouple to this board to measure the temperature of an object or area. Plugs directly into a USB port.
Measure the temperature of an object from a distance with this IR temperature sensor. Plugs directly into a USB port.
A 1018 with a 2-line by 20-character Blue Backlit LCD Display.
A Phidget InterfaceKit with a 2-line by 20-character White Backlit LCD Display.
A 1018 with a 2-line by 20-character White Backlit LCD Display.
A dual channel LCD controller that is compatible with HD44780 LCD modules.
This sturdy plastic enclosure protects your Phidget Spatial and has mounting holes on the underside.
This sturdy plastic enclosure protects your Phidget and has mounting holes on the underside.
This sturdy plastic enclosure protects your Phidget 1048_0 and has mounting holes on the underside.
This wall socket makes it easy for your VINT Hub to switch power to a device or appliance.
Measures light intensities of up to 1000 lux and connects to an Analog Input or VINT Hub port.
Use these precision resistors to interface an RTD with the PhidgetBridge with maximum accuracy.
This voltage sensor measures ±30V DC and connects to a Voltage Input.
This voltage sensor measures ±30V DC and connects to an Analog Input or VINT Hub port.
This absolute gas pressure sensor plugs into a Voltage Input and measures pressure from 20 kPa to 250 kPa.
This humidity sensor can measure the relative humidity in the environment from 10% to 95% RH. Connects to a Voltage Input.
This rotary potentiometer has 300° of travel and connects to an Analog Input or VINT Hub port.
Ideal for user input, this slider has 60mm of travel and connects to an Analog Input or VINT Hub port.
Ideal for user input, this slider has 60mm of travel and connects to a Voltage Input.
Use this heatsink to run one low current SSR without overheating.
Measures sound pressure level between 50dB to 100 dB. Connects to an Analog Input or VINT Hub port.
An accelerometer, gyroscope, and magnetometer all in one board. Measuring in 3 axes, it plugs right into your VINT hub.
This aluminium beam coupling connects two 4mm shafts together with set screws.
This aluminium beam coupling connects two 6mm shafts together with set screws.
This aluminium beam coupling connects two 8mm shafts together with set screws.
Rated for 28VAC/2.5amp or 40VDC/2.5amp switching, this SSR is controlled by a digital output.
Control the position, velocity, and acceleration of a stepper motor from your VINT port with this powerful controller.
This adapter lets you interface with all sorts of non-Phidgets resistance sensors, just select the resistance you want.
This inexpensive temperature sensor measures the ambient temperature in the area surrounding the board and connects to a Voltage Input.
.
This FSR comes with an adapter board already attached for convenience. Measures up to 2 kg of force.
Detect a touch through up to 1/8" of glass or plastic with this low-cost capacitive sensor.
Detect a touch through up to 1/2" of glass or plastic with this low-cost capacitive sensor.
This K-Type thermocouple measures temperatures from -50°C to 200°C and connects to a Phidgets thermocouple board.
This K-Type thermocouple measures temperatures from -50°C to 450°C and connects to a Phidgets thermocouple board.
This K-Type thermocouple measures temperatures from -50°C to 785°C and connects to a Phidgets thermocouple board.
This K-Type thermocouple measures temperatures from -50°C to 700°C and connects to a Phidgets thermocouple board.
This K-Type thermocouple measures temperatures from -50°C to 800°C and connects to a Phidgets thermocouple board.
This adapter cable will allow you to connect serial devices to the SBC's USB port.
24-bit color and a built in mic. Compatible with 1072 - SBC2 Not compatible with the 1073 - PhidgetSBC3.
Supports up to four USB 2.0 and/or 1.1 devices.
The vibration sensor uses a piezoelectric element to measure vibration on a surface and connects to an Analog Input or VINT Hub port.
The core of our product line, the USB VINT Hub has 6 VINT ports allowing for endless possibilities for USB sensing and control.
This wireless adapter will allow your SBC to connect to a wireless network. Recommended for the PhidgetSBC4.
This wireless adapter will allow your SBC to connect to a wireless network. Recommended for the PhidgetSBC2.
This wireless adapter will allow your SBC to connect to a wireless network. Recommended for the PhidgetSBC3.
This absolute air pressure sensor plugs into an Analog Input or VINT Hub port and measures pressure from 15 kPa to 115 kPa.
This differential air pressure sensor plugs into an Analog Input or VINT Hub port and measures pressure from -7 kPa to 7 kPa.
This inexpensive temperature sensor measures the ambient air temperature surrounding the board.
Free spinning pulley for tensioning.
This compact servo motor has 180° of travel and is an economical choice for small projects.
This servo motor has 180° of travel and reasonable torque for its size.
This DC motor has a 51:1 gearbox, a rated speed of 78 RPM and rated torque of 3.06 Kg·cm.
This is the base component for the T-Slot system. Build it into a structure using PG30 hardware.
This is the base component for the T-Slot system. The extra width provides added strength. Compatible with all PG30 items.
This is the base component for the T-Slot system. Build it into a structure using PG40 hardware.
This is the base component for the T-Slot system. The extra width provides added strength. Compatible with all PG40 items.
Precision chrome plated, case hardened linear shaft, mounted to an aluminum rail which prevents flexing under load.
This 24V power supply clips on to 35x7,5mm DIN rail.
A black ABS key fob RFID tag. Uses EM4102 protocol.
A grey ABS key fob RFID tag. Uses EM4102 protocol.
A white PVC key fob RFID tag. Uses EM4102 protocol.
This DC motor has an encoder, a 3.7:1 gearbox, a rated speed of 1080 RPM and rated torque of 0.24 Kg·cm.
This DC motor has an encoder, 10:1 gearbox, a rated speed of 230 RPM and rated torque of 0.2 Kg·cm.
This DC motor has an encoder, a 18:1 gearbox, a rated speed of 127 RPM and rated torque of 0.31 Kg·cm.
This DC motor has an encoder, a 3.7:1 gearbox, a rated speed of 670 RPM and rated torque of 0.54 Kg·cm.
This DC motor has an encoder, a 50:1 gearbox, a rated speed of 46 RPM and rated torque of 0.82 Kg·cm.
This DC motor has a 14:1 gearbox, a rated speed of 285 RPM and rated torque of 0.9 Kg·cm.
This DC motor has an encoder, a 14:1 gearbox, a rated speed of 285 RPM and rated torque of 0.9 Kg·cm.
This DC motor has a 10:1 gearbox, a rated speed of 365 RPM and rated torque of 1.53 Kg·cm.
This DC motor has an encoder, a 10:1 gearbox, a rated speed of 365 RPM and rated torque of 1.53 Kg·cm.
This DC motor has an encoder, a 100:1 gearbox, a rated speed of 23 RPM and rated torque of 1.63 Kg·cm.
This DC motor has a 14:1 gearbox, a rated speed of 175 RPM and rated torque of 1.94 Kg·cm.
This DC motor has an encoder, a 14:1 gearbox, a rated speed of 175 RPM and rated torque of 1.94 Kg·cm.
This DC motor has a 139:1 gearbox, a rated speed of 18 RPM and rated torque of 17.3 Kg·cm.
This DC motor has an encoder, a 139:1 gearbox, a rated speed of 18 RPM and rated torque of 17.3 Kg·cm.
This DC motor has a 18:1 gearbox, a rated speed of 202 RPM and rated torque of 2.45 Kg·cm.
This DC motor has an encoder, a 18:1 gearbox, a rated speed of 202 RPM and rated torque of 2.45 Kg·cm.
This DC motor has an encoder, a 51:1 gearbox, a rated speed of 78 RPM and rated torque of 3.06 Kg·cm.
This DC motor has a 50:1 gearbox, a rated speed of 73 RPM and rated torque of 6.12 Kg·cm.
This DC motor has an encoder, a 50:1 gearbox, a rated speed of 73 RPM and rated torque of 6.12 Kg·cm.
This DC motor has an encoder, a 51:1 gearbox, a rated speed of 49 RPM and rated torque of 6.63 Kg·cm.
This DC motor has a 139:1 gearbox, a rated speed of 28 RPM and rated torque of 8.46 Kg·cm.
This DC motor has an encoder, a 139:1 gearbox, a rated speed of 28 RPM and rated torque of 8.46 Kg·cm.
This DC motor has a 13:1 gearbox, a rated speed of 192 RPM and rated torque of 14.3 Kg·cm.
This DC motor has an encoder, a 13:1 gearbox, a rated speed of 192 RPM and rated torque of 14.3 Kg·cm.
This DC motor has a 168:1 gearbox, a rated speed of 15 RPM and rated torque of 173 Kg·cm.
This DC motor has an encoder, a 168:1 gearbox, a rated speed of 15 RPM and rated torque of 173 Kg·cm.
This DC motor has a 18:1 gearbox, a rated speed of 139 RPM and rated torque of 20.4 Kg·cm.
This DC motor has an encoder, a 18:1 gearbox, a rated speed of 139 RPM and rated torque of 20.4 Kg·cm.
This DC motor has a 4.25:1 gearbox, a rated speed of 588 RPM and rated torque of 5.1 Kg·cm.
This DC motor has an encoder, a 4.25:1 gearbox, a rated speed of 588 RPM and rated torque of 5.1 Kg·cm.
This DC motor has a 47:1 gearbox, a rated speed of 53 RPM and rated torque of 51 Kg·cm.
This DC motor has an encoder, a 47:1 gearbox, a rated speed of 53 RPM and rated torque of 51 Kg·cm.
This DC motor has a 76:1 gearbox, a rated speed of 33 RPM and rated torque of 82.6 Kg·cm.
This DC motor has an encoder, a 76:1 gearbox, a rated speed of 33 RPM and rated torque of 82.6 Kg·cm.
This DC motor has a 14:1 gearbox, a rated speed of 172 rpm, and rated torque of 0.5N.m.
This DC motor has a 3.7:1 gearbox, a rated speed of 654 rpm, and rated torque of 1.43 Kg·cm.
This DC motor has a 51:1 gearbox, a rated speed of 49 rpm, and rated torque of 0.65 N.m.
These are extra bright for applications where light matters.
This bracket reinforces a 90° joint between two PG30 profiles. The extra length provides better strength.
This tiny wireless adapter will enable your SBC4 to connect to your home wi-fi network.
This heavy duty DC actuator has a stroke length of 150mm with a peak force of 750N and a peak speed of 10 mm/s.
This heavy duty DC actuator has a stroke length of 300mm with a peak force of 750N and a peak speed of 10 mm/s.
This heavy duty DC actuator has a stroke length of 150mm with a peak force of 350N and a peak speed of 24 mm/s.
This heavy duty DC actuator has a stroke length of 300mm with a peak force of 350N and a peak speed of 24 mm/s.
This load cell measures compressive forces of up to 10 lbs and connects directly to a Voltage Input.
This load cell measures compressive forces of up to 100 lbs and connects directly to a Voltage Input.
This load cell measures compressive forces of up to 25 lbs and connects directly to a Voltage Input.
This load cell measures compressive forces of up to 50 lbs and connects directly to a Voltage Input.
Connect two PG40 profiles at right angles by sliding these brackets into the groove of the profile.
This aluminium jaw coupling fits a 12mm shaft w/ 4mm keyway and connects to another half coupling with a spider.
This aluminium jaw coupling fits a 4mm shaft and connects to another half coupling with a spider.
This aluminium jaw coupling fits a 5mm shaft and connects to another half coupling with a spider.
This aluminium jaw coupling fits a 6mm shaft and connects to another half coupling with a spider.
This aluminium jaw coupling fits a 8mm shaft and connects to another half coupling with a spider.
This 8-pole BLDC gear motor can output 193.7 kg-cm of torque at speeds of up to 38 RPM. The shaft has a 4mm keyway for better coupling.
This industrial electrode measures the ORP of a solution and connects to a pH/ORP Adapter.
This lab electrode measures the ORP of a solution and connects to a pH/ORP Adapter.
This industrial electrode measures the pH of a solution and connects to a pH/ORP Adapter.
Adjusts between 22 and 28V and provides 15A with current limiting if your system tries to draw more current.
A black plastic disc with an RFID tag embedded in it. A nail or screw can be put through the hole in the center for easy attaching to all kinds of surfaces. Uses EM4102 protocol.
An EM4012 RFID tag that can even be read when it is in close proximity to metal. If you want to use a tag on metal this is it.
An EM4102 tag in the shape of a nail. Strong enough to be hammered into wood or other soft materials.
A small PVC disc with an RFID tag embedded in it. Uses EM4102 protocol.
A small PVC disc with adhesive backing and an RFID tag embedded in it. Uses EM4102 protocol.
A PVC disc with adhesive backing and an RFID tag embedded in it. Uses EM4102 protocol.
This tiny servo has 180° of travel and weighs 14g, making it ideal for applications where size and weight matter.
This continuous rotation servo delivers 2 kg·cm of torque in a compact package.
This continuous rotation servo has 3.3 kg·cm of torque, making it a versatile choice.
With 12 kg·cm of torque and 180°of travel, this powerful servo is an amazing value.
This compact servo has slightly more torque than it's predecessor the MG90.
With 175° of travel, this compact servo motor is intended for light applications.
Used to extend the range of Phidgets that require less than 100mA.
This wireless adapter will enable your SBC4 to connect to your home wi-fi network.
A small PVC disc with an RFID tag embedded in it. Must be written to before use.
This clear acrylic enclosure protects your Phidget and is assembled with a Phillips screwdriver.
Use this elastomer coupling spider to connect two jaw half-couplings.
This compact bipolar stepper with a rear shaft and a gearbox has a 0.067° step angle and 14 kg·cm of torque at low speeds.
This linear encoder has a 2000mm rail and allows you to precisely measure linear position.
Free spinning sprocket for tensioning.
This 4-pole BLDC gear motor can output 12.2kg-cm of torque at speeds of up to 930 RPM. The shaft has a 4mm keyway for better coupling.
This 4-pole BLDC gear motor can output 33.65kg-cm of torque at speeds of up to 250 RPM.
This 4-pole BLDC gear motor can output 51kg-cm of torque at speeds of up to 170 RPM.
Like a tripwire, this sensor detects when an opaque object breaks the IR beam between the emitter and receiver.
This product supports our Phidget21 libraries. Use as a drop-in replacement for legacy systems.
This product can be used as a drop-in replacement for legacy systems.
