Replaced by the 1012 - PhidgetInterfaceKit 0/16/16.

Digital Inputs

The Digital Inputs are activated by an external voltage source, triggering on a wide voltage range: 4 to 30VDC. They provide built-in filtering, to eliminate false triggering from electrical noise. They can be used to convey the state of on/off devices, such as push buttons, limit switches, relays.

Digital Outputs

The Digital Outputs can be used to directly control substantial devices, switching up to 30VDC at up to 2 Amps. The Output acts as a switch to ground, and is protected from transient voltages typical when switching inductive devices - relays, solenoids, motors. The Outputs can be used to directly control devices requiring substantial power such as incandescent lights, high power LEDs, relays, solenoids, motors.

Comes Packaged With

• A 3001 - 180cm USB Cable
• A Hardware mounting kit (4 nuts and bolts, 4 plastic spacers)

Guides

Digital Input Guide

A digital input is a device that can read the state of a digital signal. Digital signals are either high or low (1 or 0). Check out this guide for more information.

Open Collector Digital Output Guide

Open collector digital outputs behave like a solid-state relay that switches a line to ground. Learn more here.