This NEMA-23 stepper motor that has fine resolution and high torque.
|Motor Type||Bipolar Stepper|
|Manufacturer Part Number||57BYGHM201|
|Step Accuracy||5 %|
|Holding Torque||9 kg·cm|
|Rated Torque||8.5 kg·cm|
|Maximum Speed (w/1063 Motor Controller)||300 RPM|
|Maximum Motor Speed||2344 RPM|
|Acceleration at Max Speed
(w/1067 Motor Controller)
|1E+06 1/16 steps/sec²|
|Recommended Voltage||24 V DC|
|Rated Current||1.7 A|
|Coil Resistance||4 Ω|
|Phase Inductance||14 mH|
|Mounting Plate Size||NEMA - 23|
|Number of Leads||4|
|Wire Length||300 mm|
The 3308 stepper motor connects to a bipolar motor controller such as the 1067 - PhidgetStepper Bipolar HC.
The following table shows how to connect the motor wires to the board connectors to produce a clockwise rotation in the stepper motor when increasing position. To wire for counter-clockwise rotation when increasing position, reverse the red and blue wires.
Note: Make sure to unplug the power cord from the motor controller before switching wires around.
|Connecting the motor directly to a power supply will destroy the motor and void the warranty. If you want to check your motor make sure it is connected to a constant current / chopper drive controller.|