Products for USB Sensing and Control
Products for USB Sensing and Control

PHIDGETS Inc.

Unit 1 - 6115 4 St SE
Calgary AB  T2H 2H9
Canada
+1 403 282-7335

22 Products Found

Refine

Encoders

Encoders are small, precise devices that measure the rate of rotation of an object. The most common application for an encoder is to attach it to the shaft of a motor to keep track of the relative position of the motor. With the proper calculations, this information can also be used to determine angular velocity and acceleration.

In most cases, an encoder must be connected to an encoder interface: a board specially designed to read the pulses from the encoder and convert it into encoder position. These boards are also listed in this category.
undefined
ID: 1047_1B

PhidgetEncoder HighSpeed 4-Input

Read up to four encoders simultaneously with this Phidget. Includes 4 digital inputs for reading limit switches.

713 in stock

$75.00

undefined
ID: 1057_2B

PhidgetEncoder HighSpeed

Read one encoder at speeds of up to 500,000 quadrature cycles per second. Connects directly to USB.

803 in stock

$50.00

undefined
ID: ENC1000_0

Quadrature Encoder Phidget

Interface a quadrature encoder at speeds of up to 100,000 quadrature cycles per second to a port on your VINT Hub.

624 in stock

$15.00

undefined
ID: HIN1101_0

Dial Phidget

This dial has a fully continuous range of motion and a center pushbutton. Connects to a VINT port.

933 in stock

$15.00

undefined
ID: 3530_1

Optical Rotary Encoder 4mm Shaft

This encoder can measure rotation at speeds of up to 3000 RPM and plugs into a Phidgets Encoder Interface.

757 in stock

$50.00

undefined
ID: 3531_0

Optical Rotary Encoder HKT22

This encoder fits on the rear shaft of our stepper motors. Measure the rotation of your motor even when it missteps.

581 in stock

$25.00

undefined
ID: 3532_1

Hollow Shaft Optical Encoder IHC3808

Ideal for use with motors, this hollow-shaft encoder fits easily onto an 8mm shaft.

499 in stock

$50.00

undefined
ID: ENC4103_0

Draw Wire Encoder (0.5m)

Like a digital tape measure, this 500mm draw wire encoder measures the length of wire pulled out of it.

13 in stock

$130.00

undefined
ID: ENC4104_0

Draw Wire Encoder (1m)

Like a digital tape measure, this 1m draw wire encoder measures the length of wire pulled out of it.

31 in stock

$145.00

undefined
ID: ENC4105_0

Draw Wire Encoder (2m)

Like a digital tape measure, this 2m draw wire encoder measures the length of wire pulled out of it.

1 in stock

$160.00

undefined
ID: ENC4106_0

Draw Wire Encoder (0.6m)

Like a digital tape measure, this 600mm draw wire encoder measures the length of wire pulled out of it.

44 in stock

$135.00

undefined
ID: ENC4107_0

Draw Wire Encoder (1.5m)

Like a digital tape measure, this 1500mm draw wire encoder measures the length of wire pulled out of it.

48 in stock

$150.00

undefined
ID: ENC4108_0

Draw Wire Encoder (2.5m)

Like a digital tape measure, this 2500mm draw wire encoder measures the length of wire pulled out of it.

43 in stock

$165.00

undefined
ID: ENC4109_0

40 CPR Quadrature Encoder

This simple and affordable quadrature-output encoder fits onto the rear shaft of a motor so its position and velocity can be monitored.

849 in stock

$10.00

undefined
ID: ENC4110_0

Linear Encoder 300mm

This 300mm linear encoder has a quadrature output with index channel and is ideal for use in linear systems.

3 in stock

$90.00

undefined
ID: ENC4111_0

Linear Encoder 500mm

This 500mm linear encoder has a quadrature output with index channel and is ideal for use in linear systems.

8 in stock

$95.00

undefined
ID: ENC4112_0

Linear Encoder 700mm

This 700mm linear encoder has a quadrature output with index channel and is ideal for use in linear systems.

10 in stock

$100.00

undefined
ID: ENC4113_0

Linear Encoder 900mm

This 900mm linear encoder has a quadrature output with index channel and is ideal for use in linear systems.

16 in stock

$110.00

undefined
ID: ENC4114_0

Linear Encoder 1100mm

This 1.1m linear encoder has a quadrature output with index channel and is ideal for use in linear systems.

18 in stock

$120.00

undefined
ID: ENC4115_0

Linear Encoder 1400mm

This 1.4m linear encoder has a quadrature output with index channel and is ideal for use in linear systems.

5 in stock

$340.00

undefined
ID: ENC4116_0

Linear Encoder 1700mm

This 1.7m linear encoder has a quadrature output with index channel and is ideal for use in linear systems.

5 in stock

$360.00

undefined
ID: ENC4117_0

Linear Encoder 2000mm

This 2m linear encoder has a quadrature output with index channel and is ideal for use in linear systems.

5 in stock

$380.00