Products for USB Sensing and Control
The 1130 is a dedicated humidity transducer designed for applications where a reliable and accurate measurement is needed.
| Sensor Properties | |
|---|---|
| Controlled By | VoltageRatio Input |
| Sensor Type | Humidity (Ambient) |
| Sensor Output Type | Ratiometric |
| Humidity Sensor | |
| Humidity Min | 10 %RH |
| Humidity Max | 95 %RH |
| Humidity Resolution | 0.4 %RH |
| Humidity Error (At 55%RH) | ± 2 %RH |
| Humidity Error Max | ± 5 %RH |
| Humidity Response Time Max | 10 s |
| Electrical Properties | |
| Supply Voltage Min | 4.8 V DC |
| Supply Voltage Max | 5 V DC |
| Current Consumption Max | 1.4 mA |
| Output Impedance | 70 Ω |
| Physical Properties | |
| Operating Temperature Min | -40 °C |
| Operating Temperature Max | 60 °C |
| Cable Length | 240 mm |
| Customs Information | |
| Canadian HS Export Code | 9025.80.00 |
| American HTS Import Code | 9025.80.10.00 |
| Country of Origin | FR (France) |
The easiest way to connect the sensor is to use a 3002 - Phidget Cable 60cm or a 3004 - Phidget Cable 350cm ; cut the Phidget cable to the desired length and solder the load cell wires to the Phidget cable as follows:
| 3130 - Sensor | Phidget Cable | Function |
|---|---|---|
| Blue | Red | Supply Voltage |
| White | Black | Ground |
| Yellow | White | Humidity Output Voltage |
Then, connect the load cell to any device with an Analog Input.
