Products for USB Sensing and Control Canada flag
Products for USB Sensing and Control

sales inquiries

quotes, distributor information, purchase orders
sales@phidgets.com

technical inquiries

support, advice, warranty, returns, misshipment
support@phidgets.com

website inquiries

corrections or suggestions
web@phidgets.com

Address

Unit 1 - 6115 4 St SE
Calgary AB  T2H 2H9
Canada

Rotary Encoder with 8mm Bore (500 CPR)

ID: 3532_1

Ideal for use with motors, this hollow-shaft encoder fits easily onto an 8mm shaft.

Discontinued

This sturdy optical quadrature encoder can be attached to the 8mm rear shaft of a motor without need for a shaft coupler. It has 500 counts (full quadrature cycles) per rotation and can be installed easily by fitting it over the shaft and tightening the set-screw. This encoder makes use of the index channel, sending one pulse for every full rotation.

Features

  • Fits onto the end of a 8mm shaft
  • Outputs 500 quadrature cycles per rotation
  • Supports rotation speeds of up to 4500 RPM
  • Comes with connector attached for quick connection to Phidgets encoder interfaces
  • Includes mounting screws and washers

Connection

This quadrature encoder can be read by an encoder interface. See the Connection & Compatibility tab for details.

Encoder Interfaces

This quadrature encoder must be read by an encoder interface. These interfaces will interpret the two quadrature signals in order to determine the continuous position of the rotating part. The following interfaces are compatible with this encoder:

Product Encoder Interface
Part Number Price Number of Encoder Inputs Count Rate Max
ENC1001_0
Quadrature Encoder Phidget
$15.00 1 1E+06 pulses/s
DCC1002_0
4A DC Motor Phidget
$40.00 1 400000 pulses/s
DCC1000_0
DC Motor Phidget
$75.00 1 400000 pulses/s
1057_3B
PhidgetEncoder HighSpeed
$50.00 1 1E+06 pulses/s
1047_2B
PhidgetEncoder HighSpeed 4-Input
$75.00 4 1E+06 pulses/s
1057_2B
PhidgetEncoder HighSpeed
$40.00 1 2E+06 pulses/s
1047_1B
PhidgetEncoder HighSpeed 4-Input
$65.00 4 1E+06 pulses/s
1065_1B
PhidgetMotorControl 1-Motor
$75.00 1 500000 cycles/s

Product Specifications

Encoder Properties
Output Circuit Type Push-Pull
Controlled By Encoder Interface
Encoder Resolution 500 CPR
Encoder Speed Max 4500 RPM
Electrical Properties
Supply Voltage Min 5 V DC
Supply Voltage Max 5 V DC
Output Frequency Max 100 kHz
Physical Properties
Shaft Diameter (Inner) 8 mm
Cable Length 1 m
Shaft Maximum Axial Load 10 N
Shaft Maximum Radial Load 20 N
Operating Humidity Min 30 %RH
Operating Humidity Max (Non-condensing) 85 %RH
Operating Temperature Min -10 °C
Operating Temperature Max 70 °C
IP Rating IP54
Weight 121 g
Customs Information
Canadian HS Export Code 9029.10.00
American HTS Import Code 9029.10.80.00
Country of Origin CN (China)

Documents

Have a look at our quadrature encoders:

Product Encoder Properties
Part Number Price Output Circuit Type Encoder Resolution Encoder Speed Max
ENC4125_0
Rotary Encoder - 8mm Hollow Shaft 1000CPR with Index
$50.00 Push-Pull 1000 CPR 6000 RPM
ENC4126_0
Rotary Encoder - 12mm Hollow Shaft 1000CPR with Index
$50.00 Push-Pull 1000 CPR 6000 RPM
ENC4124_0
Rotary Encoder - 12mm Solid Shaft 1000CPR with Index
$60.00 Push-Pull 1000 CPR 2000 RPM
ENC4120_0
Rotary Encoder - 4mm Solid Shaft 360CPR
$40.00 Push-Pull 360 CPR 6000 RPM
ENC4122_0
Rotary Encoder - 6mm Solid Shaft 1000CPR with Index
$40.00 Push-Pull 1000 CPR 6000 RPM
ENC4121_0
Rotary Encoder - 6mm Solid Shaft 600CPR
$25.00 Push-Pull 600 CPR 6000 RPM
ENC4123_0
Rotary Encoder - 8mm Solid Shaft 1000CPR with Index
$45.00 Push-Pull 1000 CPR 6000 RPM
3531_0
Rotary Encoder - For 4mm Motor Shaft 300 CPR
$25.00 Push-Pull 300 CPR 6000 RPM
ENC4109_0
Rotary Encoder - For 4mm Motor Shaft 40 CPR
$10.00 Push-Pull 40 CPR 6000 RPM
ENC4127_0
Rotary Encoder - For 5mm Motor Shaft 1000CPR
$30.00 Push-Pull 1000 CPR 5000 RPM