Products for **USB Sensing** and **Control**

Calgary AB T2H 2H9

Canada

+1 403 282-7335

This product is sourced from another supplier and will not be ordered again because the compatible encoder was discontinued by the supplier. For new designs, we recommend the 3266 revision 1 or newer, and mount a 3531 or ENC4109 encoder.

This DC motor has an encoder, a 14:1 gearbox, a rated speed of 175 RPM and rated torque of 1.94 Kg·cm.

Quantity Available: 4

Qty | Price |
---|---|

5 | $69.12 |

10 | $66.24 |

25 | $64.80 |

50 | $63.36 |

100 | $61.92 |

The 3266E is a 12 volt gear motor, generating 1.94 Kg-cm of torque at 175 RPM. Since this motor has a lower power output for its size, you can expect it to have a longer lifespan than other motors.

This motor comes equipped with an E4P US Digital Encoder, which keeps track of the motor's rotation, allowing you to control your motor precisely.

The planetary gearbox on this motor is more sophisticated than a typical spur gearbox and will provide greater efficiency, higher torque, and quieter motor operation.

DC motors can be simply connected to a power supply according to their rated voltage in order to make them run, but if you want to have control over direction, velocity, and acceleration in real-time, you'll need to use a motor controller. In order to connect this motor to a controller, you can connect the wires to the motor terminal on the controller. Don't worry about wiring the motor backwards; doing so will only reverse the direction of rotation.

Product | Controller Properties | Electrical Properties | Board Properties | ||||
---|---|---|---|---|---|---|---|

Image | Part Number | Price | Number of Motor Ports | Velocity Resolution | Acceleration Resolution | Continuous Motor Current Max | Controlled By |

1064_1B | $115.00 | 2 | 0.79 % Duty Cycle | 1.9 % Duty Cycle/s | (per motor) 14 A | USB (Mini-USB) | |

1065_1B | $75.00 | 1 | 0.39 % Duty Cycle | 24.5 % Duty Cycle/s | 5 A | USB (Mini-USB) | |

DCC1000_0 | $75.00 | 1 | 0.001 Duty Cycle | 1 % Duty Cycle/s | 25 A | VINT | |

DCC1001_0 | $40.00 | 1 | 0.001 Duty Cycle | 0.1 Duty Cycle/s | 2 A | VINT |

If you decide to use a motor controller without an encoder input, you'll need an interface to read data coming from the quadrature encoder.

Product | Encoder Interface | |||
---|---|---|---|---|

Image | Part Number | Price | Number of Encoder Inputs | Count Rate Max |

1047_1B | $75.00 | 4 | 1E+06 pulses/s | |

1057_2B | $50.00 | 1 | 2E+06 pulses/s | |

ENC1000_0 | $15.00 | 1 | 400000 pulses/s |

This motor comes with a cable that you can use to connect the encoder to an encoder interface. If you need a replacement, you can get one here:

Product | Physical Properties | |||
---|---|---|---|---|

Image | Part Number | Price | Cable Length | Cable Gauge |

3032_0 | $2.00 | 500 mm | 28 AWG |

If you need to connect the main shaft of this motor to another device with a shaft, you can use a shaft coupler:

Product | Physical Properties | ||||||
---|---|---|---|---|---|---|---|

Image | Part Number | Price | Inner Diameter | Material | Coupling Rated Torque | Coupling Rated Speed | Torsional Stiffness |

3423_0 | $7.50 | 8 mm | Aluminium | 4.1 kg·cm | 10000 RPM | 100 N·m/rad | |

TRM4313_0 | $2.80 | 8 mm | Aluminum | 35.7 kg·cm | 12000 RPM | — | |

TRM4334_0 | $3.35 | 8 mm | Aluminium | 10 kg·cm | 8000 RPM | 110 N·m/rad |

If you're using this motor to drive a rotary system that requires a lot of torque, you may be interested in pulleys and sprockets. By using a two pulleys or sprockets of different sizes, you can increase the gear ratio of the motor. Pulleys and sprockets can also be used to transmit the motor's rotation over a long distance. For more guidance on building a transmission system, visit our Rotary Motion Primer. Here is a list of our 8mm bore pulleys and sprockets:

Product | Physical Properties | |||
---|---|---|---|---|

Image | Part Number | Price | Inner Diameter | Number of Teeth |

TRM4102_0 | $2.25 | 8 mm | 22 | |

TRM4103_0 | $2.25 | 8 mm | 32 | |

TRM4104_0 | $2.45 | 8 mm | 44 | |

TRM4105_0 | $3.00 | 8 mm | 60 | |

TRM4106_0 | $3.70 | 8 mm | 80 | |

TRM4111_0 | $2.25 | 8 mm | 12 | |

TRM4112_0 | $3.15 | 8 mm | 24 | |

TRM4113_0 | $4.45 | 8 mm | 34 | |

TRM4114_0 | $6.70 | 8 mm | 50 | |

TRM4135_0 | $1.85 | 8 mm | 10 | |

TRM4158_0 | $3.25 | 8 mm | 44 |

Mounting this motor to a flat surface is easy with these metal mounting brackets. The holes on the bracket match those on the front of the gearbox. The following brackets will fit the mounting holes on this motor:

Product | Physical Properties | |||
---|---|---|---|---|

Image | Part Number | Price | Mounting Plate Size | Material |

3338_0 | $3.50 | NEMA - 17 | Mild Steel (Coated) |

Systems with heavy loads or pulley/sprocket assemblies often put a lot of sideways strain on the motor shaft. If you're using this motor to drive such a system, you can use rotary bearings to protect the motor:

Motor Properties | |
---|---|

Motor Type | DC Motor with Encoder |

Output Power (Mechanical) | 3.8 W |

Maximum Speed at Rated Voltage | 175 RPM |

Rated Torque | 1.9 kg·cm |

Stall Torque | 12.9 kg·cm |

Electrical Properties | |

Rated Voltage | 12 V DC |

Rated Current | 650 mA |

Stall Current | 2.4 A |

Physical Properties | |

Shaft Diameter | 8 mm |

Wire Length | 350 mm |

Weight | 467 g |

Gearbox Specifications | |

Gearbox Type | Planetary |

Gear Ratio | 13 ^{212}⁄_{289} : 1 |

Number of Gear Trains | 2 |

Maximum Strength of Gears | 30 kg·cm |

Shaft Maximum Axial Load | 50 N |

Shaft Maximum Radial Load | 35 N |

Backlash Error | 3° |

Encoder Specifications | |

Encoder Resolution | 360 CPR |

Connector Type | E4P |

Current Consumption Min | 27 mA |

Supply Voltage Min | 4.5 V DC |

Supply Voltage Max | 4.5 V DC |

Product | Motor Properties | Physical Properties | Gearbox Specifications | |||||
---|---|---|---|---|---|---|---|---|

Image | Part Number | Price | Maximum Speed at Rated Voltage | Rated Torque | Shaft Diameter | Weight | Gear Ratio | Gearbox Type |

3254_0 | $10.00 | 230 RPM | 200 g·cm | 6 mm | 128 g | 10 : 1 | Spur | |

3255_0 | $10.00 | 127 RPM | 310 g·cm | 6 mm | 133 g | 18 : 1 | Spur | |

3256_0 | $11.00 | 46 RPM | 820 g·cm | 6 mm | 137 g | 50 : 1 | Spur | |

3257_0 | $11.00 | 23 RPM | 1.6 kg·cm | 6 mm | 136 g | 100 : 1 | Spur | |

3261_0 | $18.00 | 1080 RPM | 240 g·cm | 6 mm | 144 g | 3 ^{12}⁄_{17} : 1 |
Planetary | |

3262_1 | $18.00 | 285 RPM | 900 g·cm | 6 mm | 170 g | 13 ^{212}⁄_{289} : 1 |
Planetary | |

3263_1 | $20.50 | 78 RPM | 3.1 kg·cm | 6 mm | 193 g | 50 ^{801}⁄_{895} : 1 |
Planetary | |

3264_1 | $20.50 | 28 RPM | 8.5 kg·cm | 6 mm | 192 g | 139 ^{184}⁄_{1221} : 1 |
Planetary | |

3265_0 | $38.00 | 670 RPM | 540 g·cm | 8 mm | 416 g | 3 ^{12}⁄_{17} : 1 |
Planetary | |

3266_0 | $42.00 | 175 RPM | 1.9 kg·cm | 8 mm | 464 g | 13 ^{212}⁄_{289} : 1 |
Planetary | |

3266_1 | $42.00 | 175 RPM | 1.9 kg·cm | 8 mm | 464 g | 13 ^{212}⁄_{289} : 1 |
Planetary | |

3267_0 | $43.00 | 49 RPM | 6.6 kg·cm | 8 mm | 526 g | 50 ^{801}⁄_{895} : 1 |
Planetary | |

3267_1 | $43.00 | 49 RPM | 6.6 kg·cm | 8 mm | 526 g | 50 ^{801}⁄_{895} : 1 |
Planetary | |

3268_1 | $43.00 | 18 RPM | 17.3 kg·cm | 8 mm | 526 g | 139 ^{184}⁄_{1221} : 1 |
Planetary | |

3269_3 | $69.00 | 588 RPM | 5.1 kg·cm | 12 mm | 1.3 kg | 4 ^{1}⁄_{4} : 1 |
Planetary | |

3270_1 | $66.00 | 192 RPM | 14.3 kg·cm | 12 mm | 1.5 kg | 12 ^{24}⁄_{25} : 1 |
Planetary | |

3272_2 | $72.00 | 53 RPM | 51 kg·cm | 12 mm | 1.7 kg | 46 ^{82}⁄_{125} : 1 |
Planetary | |

3273_2 | $72.00 | 33 RPM | 82.6 kg·cm | 12 mm | 1.7 kg | 76 ^{49}⁄_{64} : 1 |
Planetary | |

3274_2 | $76.00 | 15 RPM | 173 kg·cm | 12 mm | 2 kg | 167 ^{601}⁄_{625} : 1 |
Planetary | |

DCM4000_0 | $40.00 | 3280 RPM | 2.5 kg·cm | 8 mm | 1.4 kg | — | — | |

DCM4001_0 | $80.00 | 772 RPM | 10.6 kg·cm | 12 mm | 1.9 kg | 4.25:1 | Planetary | |

DCM4002_0 | $82.00 | 182 RPM | 45 kg·cm | 12 mm | 2.1 kg | 18:1 | Planetary | |

DCM4003_0 | $84.00 | 50 RPM | 162.5 kg·cm | 12 mm | 2.2 kg | 65:1 | Planetary | |

DCM4004_0 | $50.00 | 3000 RPM | 4.4 kg·cm | 10 mm | 2.7 kg | — | — | |

DCM4005_0 | $60.00 | 3563 RPM | 6.1 kg·cm | 10 mm | 3.3 kg | — | — |

Product | Motor Properties | Physical Properties | Gearbox Specifications | |||||
---|---|---|---|---|---|---|---|---|

Image | Part Number | Price | Maximum Speed at Rated Voltage | Rated Torque | Shaft Diameter | Weight | Gear Ratio | Gearbox Type |

3255E_0 | $40.00 | 127 RPM | 310 g·cm | 6 mm | 136 g | 18 : 1 | Spur | |

3256E_0 | $41.00 | 46 RPM | 820 g·cm | 6 mm | 140 g | 50 : 1 | Spur | |

3261E_1 | $48.00 | 1080 RPM | 240 g·cm | 6 mm | 147 g | 3 ^{12}⁄_{17} : 1 |
Planetary | |

3262E_0 | $48.00 | 285 RPM | 900 g·cm | 6 mm | 174 g | 13 ^{212}⁄_{289} : 1 |
Planetary | |

3263E_1 | $50.50 | 78 RPM | 3.1 kg·cm | 6 mm | 193 g | 50 ^{801}⁄_{895} : 1 |
Planetary | |

3265E_0 | $68.00 | 670 RPM | 540 g·cm | 8 mm | 419 g | 3 ^{12}⁄_{17} : 1 |
Planetary | |

3266E_0 | $72.00 | 175 RPM | 1.9 kg·cm | 8 mm | 467 g | 13 ^{212}⁄_{289} : 1 |
Planetary |