Products for USB Sensing and Control
Quantity Available: 1
| Qty | Price |
|---|---|
| 5 | $96.00 |
| 10 | $92.00 |
The Sinokoko P5H series of linear actuators are high-torque DC motors geared to push or pull a load along the stroke of the actuator. This actuator comes with a built-in potentiometer, allowing your application to monitor the actuator's position.
The 3548 linear actuator has a stroke length of 300mm, can move at a rate of 10 mm/s and can extert up to 750N of force at lower speeds.
This actuator is compatible with Phidget motor controllers and analog inputs. For more details, see the Connection & Compatibility tab.
You'll need a motor controller to control the position of this actuator. In order to connect it to a controller, attach the wires as follows:
|
 |
If you decide to use a motor controller with an analog input, you can connect the integrated potentiometer to the input. If you use a VINT-based motor controller, you can plug the potentiometer into another one of the VINT Hub's ports. If you decide to use a stand-alone motor controller, you'll also need a device with an analog input to read the potentiometer.
| Product | Controller Properties | Electrical Properties | Board Properties | ||||
|---|---|---|---|---|---|---|---|
| Image | Part Number | Price | Number of Motor Ports | Velocity Resolution | Acceleration Resolution | Continuous Motor Current Max | Controlled By |
 |
1064_1B | $115.00 | 2 | 0.79 % Duty Cycle | 1.9 % Duty Cycle/s | (per motor) 14 A | USB (Mini-USB) |
 |
1065_1B | $75.00 | 1 | 0.39 % Duty Cycle | 24.5 % Duty Cycle/s | 5 A | USB (Mini-USB) |
 |
DCC1000_0 | $75.00 | 1 | 0.001 Duty Cycle | 1 % Duty Cycle/s | 25 A | VINT |
 |
DCC1001_0 | $40.00 | 1 | 0.001 Duty Cycle | 0.1 Duty Cycle/s | 2 A | VINT |
|
 |
| Motor Properties | |
|---|---|
| Motor Type | DC Linear Actuator |
| Stroke Length | 300 mm |
| Maximum Speed | 10 mm/s |
| Peak Power Point | 750 N |
| Electrical Properties | |
| Rated Voltage | 24 V DC |
| Potentiometer Impedance | 5 kΩ |
| Physical Properties | |
| Material | Aluminium Alloy |
| Gear Train Material | Powder Metallurgy |
| IP Rating | IP56 |
| Weight | 1.2 kg |
| Operating Temperature Min | -25 °C |
| Operating Temperature Max | 65 °C |
| Product | Motor Properties | Electrical Properties | Physical Properties | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Image | Part Number | Price | Stroke Length | Maximum Speed | Peak Power Point | Peak Efficiency Point | Gear Ratio | Rated Voltage | Weight |
 |
3545_0 | $100.00 | 150 mm | 24 mm/s | 350 N | — | — | 24 V DC | 995 g |
 |
3546_0 | $100.00 | 150 mm | 10 mm/s | 750 N | — | — | 24 V DC | 1 kg |
 |
3547_0 | $100.00 | 300 mm | 24 mm/s | 350 N | — | — | 24 V DC | 1.2 kg |
 |
3548_0 | $100.00 | 300 mm | 10 mm/s | 750 N | — | — | 24 V DC | 1.2 kg |
 |
3570_0 | $80.00 | 50 mm | 32 mm/s | (@ 16 mm/s) 50 N | (@ 24 mm/s) 24 N | 35:1 | 12 V DC | 56 g |
 |
3571_0 | $80.00 | 100 mm | 32 mm/s | (@ 16 mm/s) 50 N | (@ 24 mm/s) 24 N | 35:1 | 12 V DC | 74 g |
 |
3572_0 | $80.00 | 140 mm | 32 mm/s | (@ 16 mm/s) 50 N | (@ 24 mm/s) 24 N | 35:1 | 12 V DC | 84 g |
 |
3573_0 | $80.00 | 50 mm | 20 mm/s | (@ 10 mm/s) 75 N | (@ 15 mm/s) 38 N | 63:1 | 12 V DC | 56 g |
 |
3574_0 | $80.00 | 100 mm | 20 mm/s | (@ 10 mm/s) 75 N | (@ 15 mm/s) 38 N | 63:1 | 12 V DC | 74 g |
 |
3575_0 | $80.00 | 140 mm | 20 mm/s | (@ 10 mm/s) 75 N | (@ 15 mm/s) 38 N | 63:1 | 12 V DC | 84 g |
 |
3576_0 | $80.00 | 50 mm | 8 mm/s | (@ 4 mm/s) 175 N | (@ 7 mm/s) 75 N | 150:1 | 12 V DC | 56 g |
 |
3577_0 | $80.00 | 100 mm | 8 mm/s | (@ 4 mm/s) 175 N | (@ 7 mm/s) 75 N | 150:1 | 12 V DC | 74 g |
 |
3578_0 | $80.00 | 140 mm | 8 mm/s | (@ 4 mm/s) 175 N | (@ 7 mm/s) 75 N | 150:1 | 12 V DC | 84 g |
