Quantity Available: 1000+
The Slider 60 is a linear potentiometer - the resistance varies linearly with the position of the slider. It outputs a voltage ratio between 0 and 1 that varies linearly over the 60mm of travel. The maximum resistance is 10K ohms.
The 1112 can be used as human input or as position feedback in a system.
This sensor can be read by any Phidget with an Analog Input or VINT Hub port. It will connect to either one using the included Phidget cable. VINT Hub ports can behave just like Analog Inputs, but have the added flexibility of being able to be used as digital inputs, digital outputs, or ports to communicate with VINT devices. For more information about VINT, see the VINT Primer.
|Image||Part Number||Price||Number of Voltage Inputs||Voltage Input Resolution|
|HUB0000_0||$30.00||6 (Shared)||* 16 bit|
|HUB5000_0||$60.00||6 (Shared)||* 16 bit|
|SBC3003_0||$120.00||6 (Shared)||* 16 bit|
This sensor comes with its own Phidget cable to connect it to an InterfaceKit or Hub, but if you need extras we have a full list down below. You can solder multiple cables together in order to make even longer Phidget cables, but you should be aware of the effects of having long wires in your system.
Welcome to the 1112 user guide! In order to get started, make sure you have the following hardware on hand:
Next, you will need to connect the pieces:
Now that you have everything together, let's start using the 1112!
In order to demonstrate the functionality of the 1112, we will connect it to the HUB0000, and then run an example using the Phidget Control Panel on a Windows machine.
The Phidget Control Panel is available for use on both macOS and Windows machines. If you would like to follow along, first take a look at the getting started guide for your operating system:
Linux users can follow the getting started with Linux guide and continue reading here for more information about the 1112.
After plugging in the 1112 into the HUB0000, and the HUB0000 into your computer, open the Phidget Control Panel. You will see something like this:
The Phidget Control Panel will list all connected Phidgets and associated objects, as well as the following information:
The Phidget Control Panel can also be used to test your device. Double-clicking on an object will open an example.
Double-click on a Voltage Ratio Input object in order to run the example:
General information about the selected object will be displayed at the top of the window. You can also experiment with the following functionality:
The maximum resistance of the slider is 10kΩ.
The Phidget Cable is a 3-pin, 0.100 inch pitch locking connector. Pictured here is a plug with the connections labelled. The connectors are commonly available - refer to the Analog Input Primer for manufacturer part numbers.
|Sensor Type||Input (Slider)|
|Controlled By||VoltageRatio Input|
|Sensor Output Type||Ratiometric|
|Linear Travel||60 mm|
|Current Consumption Max||150 μA|
|Output Impedance||10 kΩ|
|Operating Temperature Min||-25 °C|
|Operating Temperature Max||70 °C|
|Date||Board Revision||Device Version||Comment|
|June 2002||0||N/A||Product Release 45mm model|
|September 2003||0||N/A||Changed to 60mm slider|
|August 2004||0||N/A||Analog input connector changed from stereo jack to 3-pin Molex|
|December 2008||1||N/A||Smoother slider used, smaller board|
This device doesn't have an API of its own. It is controlled by opening a VoltageRatioInput channel on the Phidget that it's connected to. For a list of compatible Phidgets with VoltageRatio Inputs, see the Connection & Compatibility tab.
You can find details for the VoltageRatioInput API on the API tab for the Phidget that this sensor connects to.
|Image||Part Number||Price||Sensor Type||Controlled By||Linear Travel|
|1112_1||$11.00||Input (Slider)||VoltageRatio Input||60 mm|
|3579_0||$65.00||Input (Linear)||VoltageRatio Input||75 mm|
|3580_0||$75.00||Input (Linear)||VoltageRatio Input||100 mm|
|3581_0||$95.00||Input (Linear)||VoltageRatio Input||200 mm|
|3582_0||$120.00||Input (Linear)||VoltageRatio Input||300 mm|