Quantity Available: 604
| Qty | Price |
|---|---|
| 5 | $48.00 |
| 10 | $46.00 |
| 25 | $45.00 |
| 50 | $44.00 |
| 100 | $43.00 |
This is a small ball bearing construction, rotary encoder without index that goes up to 3000 rpm.
This encoder connects to a quadrature encoder interface. The connector at the end of the cable is compatible with all Phidgets encoder interfaces. To attach the shaft of this encoder to a motor or some other device, you can use a shaft coupler. See the Connection & Compatibility tab for details on interfaces and couplings.
This quadrature encoder must be read by an encoder interface. These interfaces will interpret the two quadrature signals in order to determine the continuous position of the rotating part. The following interfaces are compatible with this encoder:
| Product | Encoder Interface | |||
|---|---|---|---|---|
| Image | Part Number | Price | Number of Encoder Inputs | Count Rate Max |
 |
1047_1B | $75.00 | 4 | 1E+06 pulses/s |
 |
1057_2B | $50.00 | 1 | 2E+06 pulses/s |
 |
1065_1B | $75.00 | 1 | 500000 cycles/s |
 |
DCC1000_0 | $75.00 | 1 | 400000 pulses/s |
 |
DCC1002_0 | $40.00 | 1 | 400000 pulses/s |
 |
ENC1000_0 | $15.00 | 1 | 400000 pulses/s |
If you need to connect the main shaft of this motor to the shaft of another device, you can use a shaft coupler:
| Encoder Properties | |
|---|---|
| Output Circuit Type | Push-Pull (Single-Ended) |
| Controlled By | Encoder Interface |
| Encoder Resolution | 360 CPR |
| Encoder Speed Max | 3000 RPM |
| Electrical Properties | |
| Supply Voltage Min | 5 V DC |
| Supply Voltage Max | 5 V DC |
| Output Frequency Max | 80 kHz |
| Physical Properties | |
| Shaft Diameter | 4 mm |
| Shaft Maximum Axial Load | 10 N |
| Shaft Maximum Radial Load | 20 N |
| Operating Humidity Min | 30 %RH |
| Operating Humidity Max | (Non-condensing) 85 %RH |
| Operating Temperature Min | -25 °C |
| Operating Temperature Max | 85 °C |
| IP Rating | IP54 |
| Weight | 83 g |
| Product | Encoder Properties | ||||
|---|---|---|---|---|---|
| Image | Part Number | Price | Output Circuit Type | Encoder Resolution | Encoder Speed Max |
 |
3530_1 | $50.00 | Push-Pull (Single-Ended) | 360 CPR | 3000 RPM |
 |
3531_0 | $25.00 | Push-Pull (Single-Ended) | 300 CPR | 6000 RPM |
 |
3532_1 | $50.00 | Push-Pull (Single-Ended) | 360 CPR | 4500 RPM |
 |
ENC4109_0 | $10.00 | Push-Pull | 40 CPR | 6000 RPM |
