Products for USB Sensing and Control
Quantity Available: 328
| Qty | Price |
|---|---|
| 5 | $3.36 |
| 10 | $3.22 |
This beam type coupling can be used to connect two 4mm shafts together. Each shaft is held in place by two set screws, allowing for easy installation. The spiral cut design allows for up to 2° of bending from angular misalignment of the shafts as well as 0.12mm of eccentric misalignment.
If you're having trouble with slipping, you can file a groove into the shaft where the set screws hold it in place. You can also use Loctite on the set screws to ensure that they remain in place.
Note: New stock of the TRM4332_0 will use M4 set screws which will require a 2mm hex key instead of the 1.5mm key that was needed before.
If you want to be able to measure the speed that a rotary system is moving at, you can use this 4mm shaft coupler to connect to any of these encoders:
| Physical Properties | |
|---|---|
| Material | Aluminium |
| Coupling Rated Torque | 10 kg·cm |
| Coupling Rated Speed | 8000 RPM |
| Torsional Stiffness | 110 N·m/rad |
| Shaft Angularity Tolerance | 2° |
| Shaft Eccentricity Tolerance | 150 μm |
| Inner Diameter | 4 mm |
| Weight | 14 g |
| Hex Key Size Required | 1.5 mm |
| Customs Information | |
| Canadian HS Export Code | 8483.60.00 |
| American HTS Import Code | 8483.60.80.00 |
| Country of Origin | CN (China) |
