Rotary Encoder with 8mm Bore (500 CPR)

ID: 3532_1

Ideal for use with motors, this hollow-shaft encoder fits easily onto an 8mm shaft.

Discontinued

This sturdy optical quadrature encoder can be attached to the 8mm rear shaft of a motor without need for a shaft coupler. It has 500 counts (full quadrature cycles) per rotation and can be installed easily by fitting it over the shaft and tightening the set-screw. This encoder makes use of the index channel, sending one pulse for every full rotation.

Features

Fits onto the end of a 8mm shaft
Outputs 500 quadrature cycles per rotation
Supports rotation speeds of up to 4500 RPM
Comes with connector attached for quick connection to Phidgets encoder interfaces
Includes mounting screws and washers

Connection

This quadrature encoder can be read by an encoder interface. See the Connection & Compatibility tab for details.

Encoder Interfaces

This quadrature encoder must be read by an encoder interface. These interfaces will interpret the two quadrature signals in order to determine the continuous position of the rotating part. The following interfaces are compatible with this encoder:

Product		Encoder Interface
Part Number	Price	Number of Encoder Inputs	Count Rate Max
ENC1001_0 Quadrature Encoder Phidget	$15.00	1	1E+06 pulses/s
DCC1002_0 4A DC Motor Phidget	$40.00	1	400000 pulses/s
DCC1000_0 DC Motor Phidget	$75.00	1	400000 pulses/s
1057_3B PhidgetEncoder HighSpeed	$50.00	1	1E+06 pulses/s
1047_2B PhidgetEncoder HighSpeed 4-Input	$75.00	4	1E+06 pulses/s
1057_2B PhidgetEncoder HighSpeed	$40.00	1	2E+06 pulses/s
1047_1B PhidgetEncoder HighSpeed 4-Input	$65.00	4	1E+06 pulses/s
1065_1B PhidgetMotorControl 1-Motor	$75.00	1	500000 cycles/s

Product Specifications

Encoder Properties
Output Circuit Type	Push-Pull
Controlled By	Encoder Interface
Encoder Resolution	500 CPR
Encoder Speed Max	4500 RPM
Electrical Properties
Supply Voltage Min	5 V DC
Supply Voltage Max	5 V DC
Output Frequency Max	100 kHz
Physical Properties
Shaft Diameter	(Inner) 8 mm
Cable Length	1 m
Shaft Maximum Axial Load	10 N
Shaft Maximum Radial Load	20 N
Operating Humidity Min	30 %RH
Operating Humidity Max	(Non-condensing) 85 %RH
Operating Temperature Min	-10 °C
Operating Temperature Max	70 °C
IP Rating	IP54
Weight	121 g
Customs Information
Canadian HS Export Code	9029.10.00
American HTS Import Code	9029.10.80.00
Country of Origin	CN (China)

Documents

Have a look at our quadrature encoders:

Product		Encoder Properties
Part Number	Price	Output Circuit Type	Encoder Resolution	Encoder Speed Max
ENC4125_0 Rotary Encoder - 8mm Hollow Shaft 1000CPR with Index	$50.00	Push-Pull	1000 CPR	6000 RPM
ENC4126_0 Rotary Encoder - 12mm Hollow Shaft 1000CPR with Index	$50.00	Push-Pull	1000 CPR	6000 RPM
ENC4124_0 Rotary Encoder - 12mm Solid Shaft 1000CPR with Index	$60.00	Push-Pull	1000 CPR	2000 RPM
ENC4120_0 Rotary Encoder - 4mm Solid Shaft 360CPR	$40.00	Push-Pull	360 CPR	6000 RPM
ENC4122_0 Rotary Encoder - 6mm Solid Shaft 1000CPR with Index	$40.00	Push-Pull	1000 CPR	6000 RPM
ENC4121_0 Rotary Encoder - 6mm Solid Shaft 600CPR	$25.00	Push-Pull	600 CPR	6000 RPM
ENC4123_0 Rotary Encoder - 8mm Solid Shaft 1000CPR with Index	$45.00	Push-Pull	1000 CPR	6000 RPM
3531_0 Rotary Encoder - For 4mm Motor Shaft 300 CPR	$25.00	Push-Pull	300 CPR	6000 RPM
ENC4109_0 Rotary Encoder - For 4mm Motor Shaft 40 CPR	$10.00	Push-Pull	40 CPR	6000 RPM
ENC4127_0 Rotary Encoder - For 5mm Motor Shaft 1000CPR	$30.00	Push-Pull	1000 CPR	5000 RPM