This strip of 60 LEDs uses the WS2812B protocol, so each light can have its color and brightness individually set.

This controller can deliver up to 50A of continuous current and 75A of peak current to a single brushless DC motor.

This controller can deliver up to 50A of continuous current and 75A of peak current to a single DC motor.

This strip of 150 LEDs uses the WS2812B protocol, so each light can have its color and brightness individually set.

This strip of 300 LEDs uses the WS2812B protocol, so each light can have its color and brightness individually set.

This strip of 300 LEDs uses the SK6812 protocol, giving you a white light channel in addition to RGB control for each light.

This grid of 256 LEDs uses the WS2812B protocol, so each light can have its color and brightness individually set.

This LED controller can manage up to 2048 addressable LEDs.

This I2C controller lets you interface with one or more I2C devices.

This 30V 50A power guard protects your system from power surges caused by motors.

This SPI controller lets you interface with one SPI device.

This RFID interface can read and write low-frequency RFID tags.

This RTD interface offers improved noise performance and has a maximum data rate of 3.33 Hz.

Measure the DC current running through a wire with this convenient clip-on sensor.

This fuse socket provides a quick and easy way to add a Maxi fuse to your high-power system.

Two 30A 63V Maxi fuses for use with Phidget motor controller systems.

Two 50A 63V Maxi fuses for use with Phidget motor controller systems.

This draw-wire sensor extends up to 5000mm and allows you to precisely measure linear position.