Quantity Available: 50
35mm single ended shaft for series 75 worm gearboxes. W/ keyway and keys included as well as a pair of washers and a snap ring for retention in the gearbox.
This shaft is designed to fit into a worm gearbox and act as an output shaft. You can install it by following these steps:
|Image||Part Number||Price||Gearbox Series||Gear Ratio||Maximum Strength of Gears||Input Shaft Diameter|
|TRM4404_0||$155.40||75||30:1||234 N·m||24 mm|
If you need to connect this shaft to a motor or another device with a shaft, you can use a shaft coupler:
|Image||Part Number||Price||Inner Diameter||Coupling Rated Torque||Coupling Rated Speed|
|TRM4331_0||$14.80||35 mm||3.3 Mg·cm||4000 RPM|