Products for USB Sensing and Control
Quantity Available: 29
| Qty | Price |
|---|---|
| 5 | $7.10 |
| 10 | $6.81 |
This jaw type half-coupling can be used to connect a 35mm shaft to another shaft. It is held in place by two set screws, and fits together with another series 38 jaw coupling of any shaft size with a hard elastomer spider in between.
Jaw type couplings are ideal for high-torque applications and applications where shafts of two different sizes need to be coupled. This series of couplers are rated for torques as high as 3300 kg·cm and speeds of up to 4000 rpm.
This jaw type half-coupling connects to any other series 38 half-coupling with a coupling spider pressed in between. The other half and the spider are both sold separately.
You'll need a coupling spider to connect this jaw coupling to another. You can find a list of compatible spiders below:
| Product | Physical Properties | ||
|---|---|---|---|
| Part Number | Price | Material | Shore Hardness |
 Jaw Coupling Spider Series 38
|
$2.60 | Elastomer | 95-98A |
Jaw couplings are designed to connect to other jaws in the same series, which gives you the option of coupling two differently sized shafts together. Between the two jaw couplings, a coupling spider is used to hold them in place while still allowing for a small amount of flex. The jaw couplings in the list below will fit together with this coupling:
| Product | Physical Properties | |
|---|---|---|
| Part Number | Price | Inner Diameter |
 Jaw Coupling Half 17mm Series 38
|
$7.40 | 17 mm |
 Jaw Coupling Half 19mm Series 38
|
$7.40 | 19 mm |
 Jaw Coupling Half 24mm Series 38
|
$7.40 | 24 mm |
 Jaw Coupling Half 25mm Series 38
|
$7.40 | 25 mm |
 Jaw Coupling Half 35mm Series 38
|
$7.40 | 35 mm |
If you're building a rotary transmission system of any kind, chances are you'll need some rotary shaft. Here's a list of rotary shaft compatible with this shaft coupler:
| Product | Physical Properties | |
|---|---|---|
| Part Number | Price | Diameter |
 35mm Single Ended Output Shaft for Series 75 Worm Gearbox
|
$9.65 | 35 mm |
 35mm Double Ended Output Shaft for Series 75 Worm Gearbox
|
$10.75 | 35 mm |
 35mm Single Ended Output Shaft for Series 90 Worm Gearbox (Long)
|
$13.70 | 35 mm |
 35mm Double Ended Output Shaft for Series 90 Worm Gearbox (Long)
|
$14.80 | 35 mm |
| Physical Properties | |
|---|---|
| Material | Aluminum |
| Coupling Rated Torque | 3.3 Mg·cm |
| Coupling Rated Speed | 4000 RPM |
| Inner Diameter | 35 mm |
| Keyway Width | 10 mm |
| Hex Key Size Required | 4 mm |
| Customs Information | |
| Canadian HS Export Code | 8483.60.00 |
| American HTS Import Code | 8483.60.80.00 |
| Country of Origin | CN (China) |
