Products for USB Sensing and Control

Products for USB Sensing and Control

PHIDGETS Inc.

Unit 1 - 6115 4 St SE
Calgary AB  T2H 2H9
Canada
+1 403 282-7335

Lanbao CR18SCN08DNO Capacitive Proximity Sensor - 8mm

ID: 3523_0

This capacitive sensor will switch when it detects metals and some other materials within 8mm.

$35.00

Quantity Available: 39

Qty Price
5 $33.60
10 $32.20

This capacitive proximity sensor is used for non-contact detection of metallic and non-metallic objects such as liquid, powder and granular materials; it can also detect materials through glass or plastic walls.

Note that the standard detecting distance is based on a standard shape approaching the sensor in a standard way. The real detecting distance will vary depending on the shape, thickness and type of material being detected.

You can adjust the operating distance by turning a screw placed on the side of the sensor.

Comes packaged with

  • 2 plastic rings
  • a screwdriver
Accessories

Connection

You can use a 12V sensor adapter to connect this sensor to your InterfaceKit or Hub. See the Compatible Products tab for more details.

Product Specifications

Sensor Properties
Controlled By Digital Input (5V)
Detecting Distance Max 8 mm
Setting Distance Max 6.4 mm
Sensor Type Proximity (Capacitive)
Sensor Output Switch Type Normally Open
Detection Hysteresis Min 3 %
Detection Hysteresis Max 20 %
Sensor Response Time Max 20 ms
Electrical Properties
Supply Voltage Min 10 V DC
Supply Voltage Max 30 V DC
Current Consumption Max 15 mA
Protection Circuitry Reverse Polarity, Surge, Overload and Short-Circuit
Physical Properties
Cable Length 2 m
Material PBT
Operating Indicator Yellow LED
IP Rating IP67
Length 78 mm
Diameter 18 mm
Operating Temperature Min -25 °C
Operating Temperature Max 70 °C
Operating Humidity Min 35 %RH
Operating Humidity Max 95 %RH

12V Sensor Adapter

This sensor requires a 12V power supply and outputs a 0-5V signal depending on wheter the sensor is triggered. For a simple way to provide 12 volts, you can use our 12V sensor adapter. It uses the 5V supply from your InterfaceKit or Hub and steps it up to 12V while simultaneously passing the 0-5V signal from the sensor into the Phidget cable.

To connect the sensor, connect the wires as follows:

Function 35231144
+12V Brown +12V
Ground Blue GND
Data Black ANLG
Functional
Product Sensor Properties
Image Part Number Price Controlled By
1144_0 $11.00 Voltage Input (0-5V)

Alternatively, you can use the Versatile Input Phidget, which is a VINT-controlled device that can interface a wide variety of sensors, including transducers that run on a 12V supply.

To connect the sensor, connect the wires as follows:

Function 35231144
+12V Brown 12V/24V
Ground Blue Gnd
Data Black Digital
Functional
Product Board Properties
Image Part Number Price Controlled By
DAQ1400_0 $20.00 VINT

Have a look at our proximity sensors:

Product Sensor Properties
Image Part Number Price Controlled By Sensor Type Detecting Distance Max
1103_1 $11.00 VoltageRatio Input Distance (Infrared) 100 mm
3523_0 $35.00 Digital Input (5V) Proximity (Capacitive) 8 mm
3524_0 $50.00 Digital Input (5V) Proximity (Capacitive) 15 mm
3525_0 $50.00 Digital Input (5V) Through-Beam (Photoelectric) 10 m
3527_0 $35.00 Digital Input (5V) Proximity (Inductive) 15 mm
3528_0 $10.00 Digital Input (5V) Proximity (Inductive) 5 mm
3560_0 $2.50 Digital Input (5V) Proximity (Magnetic) 19 mm
3562_0 $2.50 Digital Input (5V) Proximity (Magnetic) 12 mm