Products for USB Sensing and Control

Products for USB Sensing and Control

PHIDGETS Inc.

Unit 1 - 6115 4 St SE
Calgary AB  T2H 2H9
Canada
+1 403 282-7335

418Nm 90 Series Worm Gearbox 30:1

ID: TRM4405_0

This after market gear box adapts your motor for high torque, low speed applications.

$203.50

Quantity Available: 50

Qty Price
5 $195.36
10 $187.22

Worm drives are compact gearboxes with high output torque for their size. This particular gearbox is rated for 418Nm and is compatible with 90 Series 35mm output shafts. The input shaft is 24mm and you will couple to a rotating power source - typically through a jaw coupling, timing belt pulley or chain sprocket.

Product Specifications

Gearbox Properties
Gearbox Type Worm
Gear Ratio 30:1
Backlash Error 0.2°
Maximum Strength of Gears 418 N·m
Shaft Maximum Radial Load 8.2 kN
Input Shaft Diameter 24 mm
Gearbox Series 90

Output Shafts

The following shafts will fit into the output bore on this gearbox:

Product Physical Properties
Image Part Number Price Gearbox Series
TRM4014_0 $13.70 90
TRM4015_0 $14.80 90

Shaft Couplers

If you need to connect the input shaft of this gearbox to another device with a shaft, you can use a shaft coupler:

Product Physical Properties
Image Part Number Price Inner Diameter Coupling Rated Torque Coupling Rated Speed
TRM4324_0 $6.85 24 mm 611.8 kg·cm 4000 RPM
TRM4328_0 $14.80 24 mm 3.3 Mg·cm 4000 RPM

Pulleys and Sprockets

If you're using this gearbox in a rotary system that requires a lot of torque, you may be interested in pulleys and sprockets. By using a two pulleys or sprockets of different sizes, you can increase the gear ratio of system. Pulleys and sprockets can also be used to transmit the motor's rotation over a long distance. For more guidance on building a transmission system, visit our Rotary Motion Primer. Here is a list of our 24mm bore pulleys and sprockets:

Product Physical Properties
Image Part Number Price Inner Diameter Number of Teeth
TRM4133_0 $7.40 24 mm 50
TRM4134_0 $12.95 24 mm 72
TRM4154_0 $4.65 24 mm 20

Here are all of our worm gearboxes:

Product Gearbox Properties
Image Part Number Price Maximum Strength of Gears Shaft Maximum Radial Load Input Shaft Diameter
TRM4400_0 $48.10 20 N·m 1.8 kN 9 mm
TRM4401_0 $62.90 45 N·m 3.5 kN 11 mm
TRM4402_0 $92.50 85 N·m 4.8 kN 14 mm
TRM4403_0 $111.00 163 N·m 6.3 kN 19 mm
TRM4404_0 $155.40 234 N·m 7.4 kN 24 mm
TRM4405_0 $203.50 418 N·m 8.2 kN 24 mm