Products for USB Sensing and Control
Quantity Available: 25
| Qty | Price |
|---|---|
| 5 | $60.38 |
| 10 | $57.87 |
Worm drives are compact gearboxes with high output torque for their size. This particular gearbox is rated for 45Nm and is compatible with 40 Series 19mm output shafts. The input shaft is 11mm and you will couple to a rotating power source - typically through a jaw coupling, timing belt pulley or chain sprocket.
The following shafts will fit into the output bore on this gearbox:
| Product | Physical Properties | |
|---|---|---|
| Part Number | Price | Diameter |
 19mm Single Ended Output Shaft for Series 40 Worm Gearbox
|
$6.15 | 19 mm |
 19mm Double Ended Output Shaft for Series 40 Worm Gearbox
|
$6.85 | 19 mm |
If you need to connect the input shaft of this gearbox to another device with a shaft, you can use a shaft coupler:
| Product | Physical Properties | |||
|---|---|---|---|---|
| Part Number | Price | Inner Diameter | Coupling Rated Torque | Coupling Rated Speed |
 Jaw Coupling Half 11mm Series 12
|
$1.40 | 11 mm | 35.7 kg·cm | 12000 RPM |
If you're using this gearbox in a rotary system that requires a lot of torque, you may be interested in pulleys and sprockets. By using a two pulleys or sprockets of different sizes, you can increase the gear ratio of system. Pulleys and sprockets can also be used to transmit the motor's rotation over a long distance. For more guidance on building a transmission system, visit our Rotary Motion Guide. Here is a list of our 11mm bore pulleys and sprockets:
| Gearbox Properties | |
|---|---|
| Gearbox Type | Worm |
| Gear Ratio | 30 : 1 |
| Backlash Error | 1⁄2° |
| Maximum Strength of Gears | 45 N·m |
| Shaft Maximum Radial Load | 3.5 kN |
| Input Shaft Diameter | 11 mm |
| Input Shaft Keyway Width | 4 mm |
| Output Bore Diameter | 19 mm |
| Output Bore Keyway Width | 6 mm |
| Gearbox Series | 40 |
| Customs Information | |
| Canadian HS Export Code | 8483.40.00 |
| American HTS Import Code | 8483.40.50.10 |
| Country of Origin | CN (China) |
| Product | Gearbox Properties | |||
|---|---|---|---|---|
| Part Number | Price | Maximum Strength of Gears | Shaft Maximum Radial Load | Input Shaft Diameter |
 20Nm 30 Series Worm Gearbox 30:1
|
$48.10 | 20 N·m | 1.8 kN | 9 mm |
 45Nm 40 Series Worm Gearbox 30:1
|
$62.90 | 45 N·m | 3.5 kN | 11 mm |
 85Nm 50 Series Worm Gearbox 30:1
|
$92.50 | 85 N·m | 4.8 kN | 14 mm |
 163Nm 63 Series Worm Gearbox 30:1
|
$111.00 | 163 N·m | 6.3 kN | 19 mm |
 234Nm 75 Series Worm Gearbox 30:1
|
$155.40 | 234 N·m | 7.4 kN | 24 mm |
 418Nm 90 Series Worm Gearbox 30:1
|
$203.50 | 418 N·m | 8.2 kN | 24 mm |
