14mm single ended shaft for series 30 worm gearboxes. W/ keyway and keys included as well as a pair of washers and a snap ring for retention in the gearbox.
This shaft is designed to fit into a worm gearbox and act as an output shaft. You can install it by following these steps:
|Image||Part Number||Price||Gearbox Series||Gear Ratio||Maximum Strength of Gears||Input Shaft Diameter|
|TRM4400_0||$48.10||30||30:1||20 N·m||9 mm|
If you need to connect this shaft to a motor or another device with a shaft, you can use a shaft coupler:
|Image||Part Number||Price||Inner Diameter||Coupling Rated Torque||Coupling Rated Speed|
|TRM4320_0||$6.85||14 mm||611.8 kg·cm||4000 RPM|
If you're using a rotary system that requires a lot of torque, you may be interested in pulleys and sprockets. By using a two pulleys or sprockets of different sizes, you can increase the gear ratio of the system. Pulleys and sprockets can also be used to transmit rotation over a long distance. For more guidance on building a transmission system, visit our Rotary Motion Primer. Here is a list of our 14mm bore pulleys and sprockets: