Connector used is a Molex 50-57-9405.
The index channel is used by some encoders to keep track of the number of full rotations the encoder has made. Encoder boards that don't support indexing can still use this cable to read the encoder.
|Connector A||Encoder 5-Wire|
|Connector B||Encoder 5-Wire|
|Number of Conductors||5|
|Cable Length||500 mm|
|Cable Gauge||26 AWG|
This cable connects a quadrature encoder to a Phidgets encoder interface.
|Image||Part Number||Price||Number of Encoder Inputs||Count Rate Max|
This cable can be connected to any of the encoders listed below. Just cut off one end to strip and solder the wires to the wires of one of these encoders. See the "Description" tab of this product and the product page of the desired encoder to match the wires up.
|Image||Part Number||Price||Output Circuit Type||Encoder Resolution||Wire Resolution|
|3532_0||$85.00||Push-Pull (Single-Ended)||360 CPR||—|