Products for USB Sensing and Control

Products for USB Sensing and Control

Acrylic Enclosure for the 1012

ID: 3801_1
This clear acrylic enclosure protects your Phidget and is assembled with a Phillips screwdriver.

Replaced by 3801_2

The 3801 Enclosure is designed to protect the Rev 2 version of the 1012 – PhdgetInterfaceKit 0/16/16 while giving you access to all terminals and connectors through openings in the enclosure.

You can plug and unplug cables, connect and disconnect devices, without having to open the enclosure.

This particular revision of the enclosure has thicker tabs for increased durability.

Note: The Phidget board is not included with the enclosure and must be purchased separately.

Package Includes

  • 6 clear acrylic pieces
  • Mounting Hardware (Nuts, bolts, spacers)

Required Tools

  • Small Phillips screwdriver

Product Specifications

Physical Properties
Fits Board Revision 2
Material Clear Acrylic
Thickness 3.2 mm
IP Rating 20

Warning


warning Be careful when tightening the mounting screws, as too much tension could crack the acrylic.

Phidgets

This enclosure is desgined to fit the following Phidgets. See the "Resources" tab for assembly instructions.