Products for USB Sensing and Control
This enclosure is designed to protect the Rev 2 version of the 1012 – PhdgetInterfaceKit 0/16/16 while giving you access to all terminals and connectors through openings in the enclosure.
You can plug and unplug cables and access the screw terminals without having to open the enclosure.
This particular revision of the enclosure has thicker tabs for increased durability and comes pre-assembled.
Be careful when tightening the mounting screws, excess tension can crack the acrylic.
Note: The Phidget board is not included with the enclosure and must be purchased separately.
This enclosure is desgined to fit the following Phidgets. See the "Resources" tab for assembly instructions.
| Physical Properties | |
|---|---|
| Fits Board Revision | 2 |
| Material | Clear Acrylic |
| Thickness | 3.2 mm |
| IP Rating | 20 |
| Customs Information | |
| Canadian HS Export Code | 8473.30.00 |
| American HTS Import Code | 8473.30.51.00 |
| Country of Origin | CN (China) |
|
Be careful when tightening the mounting screws, as too much tension could crack the acrylic. |
