This beam type coupling can be used to connect two 4mm shafts together. Each shaft is held in place by two set screws, allowing for easy installation. The spiral cut design allows for up to 2° of bending from angular misalignment and up to 0.12mm eccentric misalignment.
If you're having trouble with slipping, you can file a groove into the shaft where the set screws hold it in place. You can also use a Loctite adhesive on the set screws to ensure that they remain in place.
|Manufacturer Part Number||CL1-17-4mm|
|Coupling Rated Torque||3.1 kg·cm|
|Coupling Rated Speed||12000 RPM|
|Torsional Stiffness||65 N·m/rad|
|Shaft Angularity Tolerance||2°|
|Shaft Eccentricity Tolerance||120 μm|
|Inner Diameter||4 mm|
|Screw Thread Size||M3|
If you want to be able to measure the speed that a rotary system is moving at, you can use this 4mm shaft coupler to connect to any of these encoders:
|Product||Physical Properties||Encoder Properties|
|Image||Part Number||Price||Shaft Diameter||Encoder Resolution||Encoder Speed Max|
|3530_1||$50.00||4 mm||360 CPR||3000 RPM|