Replaced by the 1032 - PhidgetLED-64 Advanced.
The 1031 is a 1030 with the following added features:
The 1031 comes packaged with a 12VDC 2Amp power supply.
The PhidgetLED 64 allows you to independently control 64 Light Emitting Diodes. Each LED can be turned on and off, and its brightness controlled.
Most standard LEDs with colors such as red, amber, orange, yellow, and green have forward voltages below 3.0 Volts, and can be used with the PhidgetLED by simply soldering them to a connector-wire and inserting the wire into any PhidgetLED board connector.
The PhidgetLED 64 operates as a 2 x 32 multiplexer with 2 anodes and 32 cathodes.
Comes packaged with
Note: Cut the Double Ended cables in half and solder the cut end to the LED. Check the Installing the Hardware section of the Product Manual for more detailed information.
|LED Output||DigitalOutput||0 - 63|
Recommended Power Supplies
|LED Driver||DigitalOutput||0 - 63|