Quantity Available: 47
The 3800 Enclosure is designed to protect the Rev 0 version of the 1002 – PhidgetAnalog 4-Output while giving you access to all terminals and connectors through openings in the enclosure.
You can plug and unplug cables, connect and disconnect devices, without having to open the enclosure.
This particular revision of the enclosure has thicker tabs for increased durability.
Note: The Phidget board is not included with the enclosure and must be purchased separately.
|Be careful when tightening the mounting screws as too much tension could crack the acrylic.|
This enclosure is desgined to fit the following Phidgets. See the "Resources" tab for assembly instructions.