Products for USB Sensing and Control
Products for USB Sensing and Control

#### sales inquiries

##### quotes, distributor information, purchase orders
sales@phidgets.com

#### technical inquiries

##### support, advice, warranty, returns, misshipment
support@phidgets.com

#### website inquiries

web@phidgets.com

##### Unit 1 - 6115 4 St SE Calgary AB  T2H 2H9 Canada
Projects Dealers Terms and Conditions Discontinued Products Phidget21 Documentation

#### PHIDGETS Inc.

Unit 1 - 6115 4 St SE
Calgary AB  T2H 2H9
+1 403 282-7335

## 2-Pin Circular Cable Connector (for Enclosures)

ID: CBL4412_0
Recommended for new designs: Phidgets Inc. is not the original manufacturer for this product, but we intend to sell it (or a similar replacement with a compatible form, fit and function) for as long as it is available from the supplier.

These waterproof connectors allow you to attach 2 cables together while protecting the connection from the elements.

## $3.00 Quantity Available: 167 Qty Price 5$2.88
10 $2.76 25$2.70
50 $2.67 100$2.64

This connector is the female half of a connection that will allow two cables to be securely connected while protecting the connection from the elements. It also allows for quick and easy detaching if you want to switch between external sensors for example. This unit is designed to connect to an enclosure and allow you to plug cables into the enclosure.

This connector is suitable for cables from 3 - 8mm in diameter.

#### Connection

This connector is designed to fit inside the wall of a waterproof plastic enclosure. For more details on installation and a list of compatible enclosures, see the Connection & Compatibility tab.

#### Cable Connectors

You can attach this connector to another by pushing to two together and twisting the ring on (the ring is part of the female connector). This cable connector mates with the following female connectors:

Product Physical Properties
Image Part Number Price Number of Conductors Connector Type

#### Project Enclosures

This cable connector makes it easy to create a connection point on the wall of an enclosure. You need to drill a hole approximately 12mm in diameter into the side of the enclosure, and then you can slide the connector through the hole and fasten it in place with the nut. The cable solders to the inside, and you can connect another cable connector of opposing gender to the outside of the enclosure (the matching connector is sold separately). When not in use, the cap can be screwed onto the enclosure's connector. Here's a list of all of the waterproof project enclosures we have available:

Product Physical Properties
Image Part Number Price Material Volume Dimensions
BOX4200_0 $5.00 High impact ABS approx. 550 cm³ 108x83x63 mm BOX4201_0$8.00 High impact ABS approx. 613 cm³ 167x108x34 mm
BOX4202_0 $12.00 High impact ABS approx. 695 cm³ 130x80x67 mm BOX4203_0$10.00 High impact ABS approx. 1425 cm³ 192x112x67 mm
BOX4204_0 $12.00 High impact ABS approx. 1425 cm³ 192x112x67 mm BOX4205_0$12.00 High impact ABS approx. 2525 cm³ 223x143x80 mm
BOX4206_0 $15.00 High impact ABS approx. 2525 cm³ 223x143x80 mm BOX4207_0$20.00 High impact ABS approx. 2990 cm³ 215x145x96 mm

#### Product Specifications

Physical Properties
Number of Conductors 2
IP Rating 68
Connector Type Male (Enclosure)
Customs Information
CBL4411_0 $4.00 2 Male CBL4412_0$3.00 2 Male (Enclosure)