Quantity Available: 259
This jaw type half-coupling can be used to connect a 6mm shaft to another shaft. It is held in place by two set screws, and fits together with another series 12 jaw coupling of any shaft size with a hard elastomer spider in between. See the Connection & Compatibility tab for a complete list of compatible couplings and spiders.
Jaw type couplings are ideal for high-torque applications and applications where shafts of two different sizes need to be coupled. This series of couplers are rated for torques as high as 35 kg·cm and speeds of up to 12000 rpm.
This jaw type half-coupling connects to any other series 12 half-coupling with a coupling spider pressed in between. The other half and the spider are both sold separately.
You'll need a coupling spider to connect this jaw coupling to another. You can find a list of compatible spiders below:
|Image||Part Number||Price||Material||Shore Hardness|
Jaw couplings are designed to connect to other jaws in the same series, which gives you the option of coupling two differently sized shafts together. Between the two jaw couplings, a coupling spider is used to hold them in place while still allowing for a small amount of flex. The jaw couplings in the list below will fit together with this coupling:
|Image||Part Number||Price||Inner Diameter|
Stepper motors have high torque and precise position control. This shaft coupler can connect to the main shaft of the following stepper motors:
|Product||Physical Properties||Motor Properties||Electrical Properties||Gearbox Properties|
|Image||Part Number||Price||Shaft Diameter||Mounting Plate Size||Rated Torque||Recommended Voltage||Gearbox Type||Gear Ratio|
|3321_0||$36.00||6 mm||NEMA - 11||14 kg·cm||12 V DC||Planetary||26 103⁄121 : 1|
|3322_0||$38.00||6 mm||NEMA - 11||32 kg·cm||12 V DC||Planetary||99 1044⁄2057 : 1|