Products for USB Sensing and Control

Products for USB Sensing and Control

PHIDGETS Inc.

Unit 1 - 6115 4 St SE
Calgary AB  T2H 2H9
Canada
+1 403 282-7335

25mm Single Ended Output Shaft for Series 50 Worm Gearbox

ID: TRM4008_0

$6.85

Quantity Available: 46

Qty Price
5 $6.58
10 $6.30

25mm single ended shaft for series 50 worm gearboxes. W/ keyway and keys included as well as a pair of washers and a snap ring for retention in the gearbox.

Product Specifications

Physical Properties
Diameter 25 mm
Gearbox Series 50

Worm Gearboxes

This shaft is designed to fit into a worm gearbox and act as an output shaft. You can install it by following these steps:

  • Put the keys into the keyways on the shaft.
  • Slide the long end of the shaft through the gearbox.
  • The long end of the shaft should stick out the other end of the gearbox; slide the washer onto that end.
  • Put the snap ring on after the washer (There is a groove at the end of the shaft for the ring to rest inside).
Product Gearbox Properties
Image Part Number Price Gearbox Series Gear Ratio Maximum Strength of Gears Input Shaft Diameter
TRM4402_0 $92.50 50 30:1 85 N·m 14 mm

Shaft Couplers

If you need to connect this shaft to a motor or another device with a shaft, you can use a shaft coupler:

Product Physical Properties
Image Part Number Price Inner Diameter Material Coupling Rated Torque Coupling Rated Speed
TRM4325_0 $6.85 25 mm Aluminum 611.8 kg·cm 4000 RPM
TRM4329_0 $14.80 25 mm Aluminum 3.3 Mg·cm 4000 RPM

Pulleys and Sprockets

If you're using a rotary system that requires a lot of torque, you may be interested in pulleys and sprockets. By using a two pulleys or sprockets of different sizes, you can increase the gear ratio of the system. Pulleys and sprockets can also be used to transmit rotation over a long distance. For more guidance on building a transmission system, visit our Rotary Motion Primer. Here is a list of our 25mm bore pulleys and sprockets:

Product Physical Properties
Image Part Number Price Inner Diameter Number of Teeth
TRM4155_0 $4.65 25 mm 20
TRM4156_0 $8.00 25 mm 40
TRM4157_0 $13.35 25 mm 60

Rotary Bearings

Systems with heavy loads or pulley/sprocket assemblies often put a lot of sideways strain on the shaft. In such a system, you can use rotary bearings to protect and support the shaft:

Product Physical Properties Mechanical Properties
Image Part Number Price Inner Diameter Bearing Type Static Load Dynamic Load
TRM4506_0 $5.25 25 mm Rotary Shaft (Flanged) 7.9 kN 14 kN
TRM4507_0 $5.75 25 mm Rotary Shaft (Pillow Block) 7.9 kN 14 kN
Product Physical Properties
Image Part Number Price Gearbox Series
TRM4008_0 $6.85 50
TRM4009_0 $7.40 50