Quantity Available: 228
This bar is used to join 2 extrusions together in a straight line fashion. A 2.5mm hex drive is required to tighten the set screws. You should use 2 bars per joint though you can use as many as 4 if extra strength is desired. For use with PG30 extrusions.
This bracket connects two PG30 T-slot profiles together. Here's a list of compatible profiles:
|Manufacturer Part Number||3.51.08|
|T-Slot Profile Size||PG30|
|Canadian HS Export Code||8302.49.00|
|American HTS Import Code||8302.49.60.85|
|Country of Origin||CN (China)|