Products for USB Sensing and Control
This bracket is used to connect 3 extrusion pieces into a 3d corner such as the vertex of a cube. You are required to use an M12 tap to bore out the end of the extrusions into which you insert the included bore reducer. Then just bolt the bracket on with an M6x20 bolt. Ideally you want to use a bolt with the DIN 7991 head style but it doesn't actually matter too much.
This corner connects three PG30 T-slot profiles together. Here's a list of compatible profiles:
| Product | Physical Properties | ||
|---|---|---|---|
| Part Number | Price | T-Slot Profile Size | Number of Slots |
 PG30 Profile 30x30
|
$8.75/Meter | PG30 | 4 |
| Look-up Reference | |
|---|---|
| Catalogue Page | 95 |
| Manufacturer Part Number | 3.92.3030.02 |
| Physical Properties | |
| T-Slot Profile Size | PG30 |
| Customs Information | |
| Canadian HS Export Code | 8302.49.00 |
| American HTS Import Code | 8302.49.60.85 |
| Country of Origin | CN (China) |
| Product | Physical Properties | |
|---|---|---|
| Part Number | Price | T-Slot Profile Size |
 Anchor Connector-PG30-Oblique (Model P)
|
$1.15 | PG30 |
 Bracket-PG30-30x30
|
$0.70 | PG30 |
 Bracket-PG30-30x60
|
$0.85 | PG30 |
 Bracket-PG30-60x60
|
$1.25 | PG30 |
 Inner Bracket PG30-A with set screw (8 pcs)
|
$5.20 | PG30 |
 Inner Bracket PG30-B with set screw (8 pcs)
|
$5.20 | PG30 |
 Linear Bar Connector-PG30 with set screws (4 pcs)
|
$7.40 | PG30 |
 Butt Connector-PG30
|
$0.50 | PG30 |
 Cubic Connector PG30 (2 pcs)
|
$7.40 | PG30 |
 Screw Connector PG30
|
$0.80 | PG30 |
