Quantity Available: 300
This bracket allows you to connect extrusions at right angles to one another. It is suitable for use with PG20 extrusions. They are not as strong as the screw or butt connectors but are fast and easy to use. A 2.5mm hex drive is required to tighten the set screw.
Of critical importance is that you make sure you have selected the correct type (A or B). Refer to the T-slot primer in the specifications section for information on selecting the correct style.
This bracket connects two PG20 T-slot profiles together. Here's a list of compatible profiles:
|Manufacturer Part Number||3.41.06B|
|T-Slot Profile Size||PG20|
|Canadian HS Export Code||8302.49.00|
|American HTS Import Code||8302.49.60.85|
|Country of Origin||CN (China)|