Product Specifications

Probe Thermocouples and RTDs

This mounting nut fits onto a probe thermocouple or RTD so it can securely mount through the side of a panel or enclosure. Here are the steps for assembling the pieces:

• Slide the shorter nut onto the probe with the threaded end facing outward
• Slide on the mounting sleeve
• Slide the longer nut onto the probe with the long end facing outward
• Thread the jam nut onto the very end
• Move the pieces to the desired length on the probe and tighten the front and back nuts until secure
• Screw the entire assembly into the threaded hole in your installation and then tighten the jam nut against the probe to provide tension and prevent loosening over time from vibrations.

Here is a list of thermocouples and RTDs we sell that are compatible with this nut:

Product		Temperature Sensor
Part Number	Price	Thermocouple Type	Ambient Temperature Min	Ambient Temperature Max
TMP4106_0 K-Type Probe Thermocouple 11cm	$16.00	K	-40 °C	400 °C
TMP4107_0 K-Type Probe Thermocouple 20cm	$16.00	K	-40 °C	400 °C
TMP4109_0 PT1000 4-Wire RTD 11cm	$40.00	—	-50 °C	500 °C
TMP4110_0 PT1000 4-Wire RTD 20cm	$40.00	—	-50 °C	500 °C