Products for USB Sensing and Control

Products for USB Sensing and Control

Acrylic Enclosure for the 1024

ID: 3825_0
This clear acrylic enclosure protects your Phidget and is assembled with a Phillips screwdriver.

Replaced by 3825_1

Replaced by the 3825_1 - Acrylic Enclosure for the 1024

The 3825 Enclosure is designed to protect the 1024 – PhidgetRFID Read-Write while giving you access to all terminals and connectors through openings in the enclosure.

You can plug and unplug cables without having to open the enclosure.

Note: The PhidgetRFID board is not included with the enclosure and must be purchased separately.

Package Includes

  • 6 clear acrylic pieces
  • Mounting Hardware (Nuts, bolts, spacers)

Required Tools

  • Small Phillips screwdriver

Product Specifications

Physical Properties
Fits Board Revision 0
Material Clear Acrylic
Thickness 3.2 mm
IP Rating 20

Warning


warning Be careful when tightening the mounting screws, as too much tension could crack the acrylic. Also, this enclosure can fit together two different ways. If it seems like the hole for the USB port is on the wrong end, flip over the bottom piece and try again.

Phidgets

This enclosure is desgined to fit the following Phidgets. See the "Resources" tab for assembly instructions.

Product
Image Part Number Price
1024_0 $60.00
Product Physical Properties
Image Part Number Price Material
3825_1 $8.50 Clear Acrylic
3853_0 $6.50 Polycarbonate