Products for USB Sensing and Control

Products for USB Sensing and Control

5mm RBG Super Flux (Bag of 5)

ID: 3610_0
These are extra bright for applications where light matters.

Replaced by 3610_1

Replaced by the 3610_1 - 5MM RGB Super Flux (Bag of 5)

The 3610 LED is a square of brightness with four times the capacity of a regular LED and has a very wide light beam of 90°. Because of its brightness it is not recommended as an indicator light.

This product has been replaced by the 3610_1 - 5MM RGB Super Flux (Bag of 5) . The new revision is almost identical to this one, except some of the electrical specifications are slightly different.


Packaging


Comes in an Antistatic pouch containing 5 LEDs

Product Specifications

Light Properties (Red LED)
Emitting Color Red
Dominant Wavelength 625 nm
Luminous Intensity 1.3 cd
Forward Voltage Min 2 V DC
Forward Voltage Max 2.2 V DC
Beam Angle 90°
Light Properties (Green LED)
Emitting Color Green
Dominant Wavelength 520 m
Luminous Intensity 2.5 cd
Forward Voltage Min 3 V DC
Forward Voltage Max 3.2 V DC
Beam Angle 90°
Light Properties (Blue LED)
Emitting Color Blue
Dominant Wavelength 467 m
Luminous Intensity 1.1 cd
Forward Voltage Min 3 V DC
Forward Voltage Max 3.2 V DC
Beam Angle 90°
Electrical Properties
Forward Current (Per color) 20 mA

You can control up to 64 LEDs with the 1032 - PhidgetLED-64 Advanced.


You can also connect your LEDs to any device with a Digital Output.


When connecting to a 1032, use the LED cables and connect the anode to the red wire and the three cathodes to three black wires.


When connecting to Digital Outputs, connect the anode to the 5V and the three cathodes to three Digital Outputs.


For more information on LEDs, visit the LED Primer.


Note: When connecting to Digital Outputs, the LED will turn on when the Digital Output is OFF. To turn off the LED you must turn ON the Digital Output. Diagram