Products for USB Sensing and Control

Products for USB Sensing and Control

12V/1.5Kg-cm/365RPM 10:1 DC Gear Motor

ID: 3258_0
This DC motor has a 10:1 gearbox, a rated speed of 365 RPM and rated torque of 1.53 Kg·cm.

Discontinued

The 3258 is a 12 volt gear motor, generating 1.53 Kg-cm of torque at 365 RPM. While this motor is small and inexpensive, it is also aggressive- less efficient than the others, but very powerful for its size.

This family of motors (3258, 3259, 3260) have the same gearbox type and mounting metrics as the (3254, 3255, 3256, 3257) family of motors.


Warnings


warning The torque this motor produces when it stalls exceeds the rated strength of the gearbox. This means that stalling or very heavily loading this motor can cause serious damage to the gearbox. To avoid damage, avoid sudden loads or any load higher than the Maximum Strength of Gears spec.

Product Specifications

Motor Properties
Motor Type DC Motor
Output Power (Mechanical) 7 W
Maximum Speed at Rated Voltage 365 RPM
Rated Torque 1.5 kg·cm
Stall Torque 14.1 kg·cm
Electrical Properties
Rated Voltage 12 V DC
Rated Current 1.1 A
Stall Current 5 A
Physical Properties
Shaft Diameter 6 mm
Weight 270 g
Recommended Wire Size (Motor) 16 - 18 AWG
Gearbox Specifications
Gearbox Type Spur
Gear Ratio 10 : 1
Number of Gear Trains 2
Maximum Strength of Gears 3 kg·cm
Shaft Maximum Axial Load 35 N
Shaft Maximum Radial Load 25 N

The 3258 DC motor connects to either of the following controllers:



You'll need to solder wires to the contacts of the motor in order to connect it to a controller.