Quantity Available: 14
The 3825 Enclosure is designed to protect the 1024 – PhidgetRFID Read-Write while giving you access to all terminals and connectors through openings in the enclosure.
You can plug and unplug cables without having to open the enclosure.
This particular revision of the enclosure comes pre-assembled.
Note: The PhidgetRFID board is not included with the enclosure and must be purchased separately.
This enclosure is desgined to fit the following Phidgets. See the "Resources" tab for assembly instructions.
|Fits Board Revision||0|
|Be careful when tightening the mounting screws, as too much tension could crack the acrylic. Also, this enclosure can fit together two different ways. If it seems like the hole for the USB port is on the wrong end, flip over the bottom piece and try again.|