Products for USB Sensing and Control
Products for USB Sensing and Control

Plastic Shell Enclosure for the 1024

ID: 3853_0

This sturdy plastic enclosure protects your Phidget and has mounting holes on the underside.


This enclosure is no longer available sold separately, since it now comes included with the 1024_0B.

The 3853 Enclosure is designed to protect the 1024 - PhidgetRFID Read/Write while still giving you access to the USB port and terminal block through openings in the enclosure. Tags can be read by placing them flat on the face of the enclosure where the Phidgets logo is.

There are mounting holes that go through the bottom of the enclosure, so the board can be mounted to a flat surface and the cover can snap on top.


Note: PhidgetRFID and mounting screws not included.


This enclosure is desgined to fit the following Phidgets. See the "Resources" tab for assembly instructions.

Product Specifications

Physical Properties
Fits Board Revision 0
Material Polycarbonate
Thickness 1.9 mm
IP Rating 20
Customs Information
Canadian HS Export Code 8473.30.00
American HTS Import Code 8473.30.51.00
Country of Origin CN (China)