Products for USB Sensing and Control
Products for USB Sensing and Control


Unit 1 - 6115 4 St SE
Calgary AB  T2H 2H9
+1 403 282-7335

Acrylic Enclosure for the 3053

ID: 3822_2
The availability of this product depends on other products; it will be available as long as the 3053 is, unless an improved enclosure is released.

This clear acrylic enclosure protects your Phidget and is assembled with a Phillips screwdriver.


Quantity Available: 100

Qty Price
5 $7.60
10 $7.20
25 $6.40
50 $5.60
100 $5.20
250 $4.80
500 $4.40
1000 $4.00

The 3822 Enclosure is designed to protect the Rev 0 version of the 3053 – SSR Dual Relay Board while giving you access to all terminals and connectors through openings in the enclosure.

You can plug and unplug cables, connect and disconnect devices, without having to open the enclosure.

Note: The Phidget board is not included with the enclosure and must be purchased separately.

Package Includes

  • 6 clear acrylic pieces
  • Mounting Hardware (Nuts, bolts, spacers)

Required Tools

  • Small Phillips screwdriver


warning Be careful when tightening the mounting screws as too much tension could crack the acrylic.


This enclosure is desgined to fit the following Phidgets. See the "Resources" tab for assembly instructions.

Product Specifications

Physical Properties
Fits Board Revision 0
Material Clear Acrylic
Thickness 3.2 mm
IP Rating 20