Quantity Available: 206
When you need to pass a cable into a waterproof enclosure you need to drill a hole in the enclosure. This of course makes it no longer water tight. To solve this, you can use a cable gland to make a water tight seal around the cable you are passing into the enclosure. This gland is suitable for cables from 3.5 - 8mm in diameter.
This cable gland is designed to be installed into the side of a waterproof project enclosure. See the Connection & Compatibility tab for details.
This cable gland makes it easy to run a cable through an enclosure. You need to drill a hole 15.6mm in diameter into the side of the enclosure, and then you can screw the two halves of the cable gland onto either side of the hole. The cable runs through, and you can twist the cap to tighten it around the cable. Here's a list of all of the waterproof project enclosures we have available:
|BOX4200_0||$5.00||High impact ABS||approx. 550 cm³||108x83x63 mm|
|BOX4201_0||$8.00||High impact ABS||approx. 613 cm³||167x108x34 mm|
|BOX4202_0||$12.00||High impact ABS||approx. 695 cm³||130x80x67 mm|
|BOX4203_0||$10.00||High impact ABS||approx. 1425 cm³||192x112x67 mm|
|BOX4204_0||$12.00||High impact ABS||approx. 1425 cm³||192x112x67 mm|
|BOX4205_0||$12.00||High impact ABS||approx. 2525 cm³||223x143x80 mm|
|BOX4206_0||$15.00||High impact ABS||approx. 2525 cm³||223x143x80 mm|
|BOX4207_0||$20.00||High impact ABS||approx. 2990 cm³||215x145x96 mm|
This cable gland can be used with cable ranging from 3.5 to 8mm in diameter. Multi-conductor cable is handy for getting multiple wires in through a single gland. Here's a list of multi-conductor cable we have for sale:
|Image||Part Number||Price||Number of Conductors||Cable Gauge|