Products for USB Sensing and Control
Products for USB Sensing and Control


Unit 1 - 6115 4 St SE
Calgary AB  T2H 2H9
+1 403 282-7335

Anchor Connector-PG40-Oblique (Model P)

ID: TSL4101_0
Recommended for new designs: This product is sourced from another supplier, but it (or a similar replacement with a compatible form, fit and function) is estimated to be available for as long as it is available from the supplier.

This anchor connects two PG40 T-Slot profiles together. Swivels to allow for non-right angle connections.


Quantity Available: 1000+

Qty Price
5 $1.10
10 $1.06
25 $1.04
50 $1.01
100 $0.99

This anchor connector allows 2 PG40 extrusions to be connected together at an angle other than 90°. It requires some machining to use, specifically:
A 15mm hole, 27mm deep and 32mm from the end of the extrusion (measured from centre of extrusion is cut at an angle). See the T-Slot primer in the specifications section for more detailed information and pictures.

T-Slot Profiles

This anchor connector connects two PG40 T-slot profiles together. Here's a list of compatible profiles:

Product Physical Properties
Image Part Number Price T-Slot Profile Size Number of Slots
TSL4004_0 $12.00/Meter PG40 4
TSL4005_0 $20.00/Meter PG40 6

Product Specifications

Look-up Reference
Catalogue Page 53
Manufacturer Part Number
Physical Properties
T-Slot Profile Size PG40


Here are all of the methods for connecting PG40 profiles together:

Product Physical Properties
Image Part Number Price T-Slot Profile Size
TSL4101_0 $1.15 PG40
TSL4106_0 $0.65 PG40
TSL4107_0 $1.25 PG40
TSL4108_0 $2.70 PG40
TSL4113_0 $7.40 PG40
TSL4114_0 $7.40 PG40
TSL4117_0 $8.90 PG40
TSL4118_0 $4.45 PG40
TSL4119_0 $4.45 PG40
TSL4121_0 $0.65 PG40
TSL4123_0 $8.90 PG40
TSL4223_0 $0.80 PG40