Quantity Available: 1000+
This anchor connector allows 2 PG30 extrusions to be connected together at an angle other than 90°. It requires some machining to use, specifically:
A 12mm hole, 21mm deep and 30mm from the end of the extrusion (measured from centre of extrusion is cut at an angle). See the T-Slot primer in the resources section for more detailed information and pictures.
|Manufacturer Part Number||3.11.30.04|
|T-Slot Profile Size||PG30|
This anchor connector connects two PG30 T-slot profiles together. Here's a list of compatible profiles: