Products for USB Sensing and Control
Products for USB Sensing and Control

PHIDGETS Inc.

Unit 1 - 6115 4 St SE
Calgary AB  T2H 2H9
Canada
+1 403 282-7335

63 Products Found

Refine

Controllers

All Controllers
undefined
VINT
ID: HUB0000_0

VINT Hub Phidget

The core of our product line, the USB VINT Hub has 6 VINT ports allowing for endless possibilities for USB sensing and control.

1000+ in stock

$30.00

undefined
ID: RCC0004_0

PhidgetAdvancedServo 8-Motor

Control up to 8 RC servo motors or actuators with this controller board. Connects to your computer via USB.

921 in stock

$85.00

undefined
VINT
ID: HUB5000_0

Wireless VINT Hub

Use Phidgets in your local network with this 6 port Wireless VINT Hub. Works with ethernet or a WiFi network.

982 in stock

$60.00

undefined
VINT
ID: SBC3003_0

PhidgetSBC4

Single Board Computer running Debian with 3 high-speed USB ports and 6 VINT ports. 512 MiB SDRAM and 16 GB SD Card.

326 in stock

$120.00

undefined
VINT
ID: DAQ1000_0

8x Voltage Input Phidget

With eight analog ports, you can connect a bunch of 5V sensors or measure small voltage signals.

808 in stock

$20.00

undefined
VINT
ID: DAQ1200_0

4x Digital Input Phidget

Add 4 digital inputs to your VINT Hub. These inputs have a shorter trigger time than a VINT port in Digital Input mode.

1000+ in stock

$12.00

undefined
VINT
ID: DAQ1300_0

4x Isolated Digital Input Phidget

Add 4 isolated active-high digital inputs to your hub at the cost of only one VINT port.

410 in stock

$20.00

undefined
VINT
ID: DAQ1301_0

16x Isolated Digital Input Phidget

Add 16 isolated active-high digital inputs to your hub at the cost of only one VINT port.

302 in stock

$50.00

undefined
VINT
ID: DAQ1500_0

Wheatstone Bridge Phidget

Measure up to 2 load cells or Wheatstone Bridge-based sensors with this input module. Connects to a VINT port.

475 in stock

$30.00

undefined
VINT
ID: DCC1000_0

DC Motor Phidget

Control one high-current brushed DC motor with this powerful Phidget. The encoder input and analog input can enable precise control motor velocity and position.

893 in stock

$75.00

undefined
VINT
ID: DCC1002_0

4A DC Motor Phidget

Control a single DC motor up to 4A with this compact and affordable Phidget. Connects to a VINT port.

1000+ in stock

$40.00

undefined
VINT
ID: DCC1003_0

2x DC Motor Phidget

Control two DC motors from one VINT port with this compact motor controller.

1000+ in stock

$60.00

undefined
VINT
ID: DCC1100_0

Brushless DC Motor Phidget

Control a brushless DC motor from your VINT Hub. The hall effect input enables easy position and velocity control.

982 in stock

$65.00

undefined
VINT
ID: ENC1000_0

Quadrature Encoder Phidget

Interface a quadrature encoder at speeds of up to 100,000 quadrature cycles per second to a port on your VINT Hub.

912 in stock

$15.00

undefined
VINT
ID: LCD1100_0

Graphic LCD Phidget

Write text and draw pictures to this 128x64px graphic LCD display that connects to a VINT port.

1000+ in stock

$30.00

undefined
VINT
ID: LED1000_0

32x Isolated LED Phidget

Control the current, voltage and brightness of 32 LEDs from a VINT port with this externally powered module.

299 in stock

$50.00

undefined
VINT
ID: OUT1000_0

12-bit Voltage Output Phidget

Produce a voltage from 0 to 4.2 volts with this simple voltage output module.

824 in stock

$15.00

undefined
VINT
ID: OUT1001_0

Isolated 12-bit Voltage Output Phidget

Produce a voltage from -10 to +10 volts with this isolated voltage output module.

1000+ in stock

$30.00

undefined
VINT
ID: OUT1002_0

Isolated 16-bit Voltage Output Phidget

Produce a voltage from -10 to +10 volts with this 16-bit isolated voltage output module.

812 in stock

$50.00

undefined
VINT
ID: OUT1100_0

4x Digital Output Phidget

Add four 5V PWM-enabled digital outputs to your hub with this simple and affordable module.

415 in stock

$15.00

undefined
VINT
ID: RCC1000_0

16x RC Servo Phidget

Control position, velocity, and acceleration of 16 RC servos with just one VINT port.

319 in stock

$60.00

undefined
VINT
ID: REL1000_0

4x Relay Phidget

Switch the power of up to four circuits at 210W of DC power or 1750 VA of AC power with this mechanical relay module.

1000+ in stock

$30.00

undefined
VINT
ID: REL1100_0

4x Isolated Solid State Relay Phidget

Add four PWM-enabled solid state relay outputs to your hub with this module. This board is isolated to prevent ground loops.

575 in stock

$25.00

undefined
VINT
ID: REL1101_0

16x Isolated Solid State Relay Phidget

Add 16 PWM-enabled solid state relay outputs to your hub. This module is isolated from input to output.

318 in stock

$50.00

undefined
VINT
ID: STC1002_0

8A Stepper Phidget

Control the position, velocity, and acceleration of one high-power stepper motor with this Phidget.

776 in stock

$80.00

undefined
VINT
ID: STC1003_0

4A Stepper Phidget

This compact Stepper Phidget gives you control of one bipolar stepper motor from a port on your VINT hub.

608 in stock

$40.00

undefined
ID: 1002_0B

PhidgetAnalog 4-Output

Outputs a voltage from -10V to +10V.

872 in stock

$85.00

undefined
ID: 1010_0

PhidgetInterfaceKit 8/8/8 Mini-Format

The ideal product for OEMs and Systems Integrators. The small DIP-36 package will plug right into your own designed board.

337 in stock

$80.00

undefined
ID: 1011_0

PhidgetInterfaceKit 2/2/2

Small Dongle with 2 Analog Inputs, 2 Digital Inputs and 2 Digital Outputs. Use it when space is critical.

1000+ in stock

$50.00

undefined
ID: 1012_2B

PhidgetInterfaceKit 0/16/16

Use it to check the state of switches and push buttons, and/or to switch relays, solenoids, and LEDs.

1000+ in stock

$95.00

1014_2B - PhidgetInterfaceKit 0/0/4
ID: 1014_2B

PhidgetInterfaceKit 0/0/4

This board has 4 SPDT mechanical relays rated at 210W for DC or 1750VA for AC.

1000+ in stock

$55.00

undefined
ID: 1017_1B

PhidgetInterfaceKit 0/0/8

Control 8 DPDT mechanical relays, switching up to 250VAC/2amp or 200VDC/2amp.

565 in stock

$85.00

undefined
ID: 1018_2B

PhidgetInterfaceKit 8/8/8

The Phidgets workhorse. Connect sensors, control outputs, and read in digital inputs.

1000+ in stock

$80.00

undefined
ID: 1019_1B

PhidgetInterfaceKit 8/8/8 w/6 Port Hub

A 1018 with an on-board powered 6-port full-speed (12Mbit/s) USB hub.

567 in stock

$110.00

undefined
ID: 1024_0B

PhidgetRFID Read-Write

Read and write to RFID tags up to 6cm away. Supports EM4100 series, ISO11785 FDX-B and our own PhidgetTag protocols.

1000+ in stock

$60.00

undefined
ID: 1032_0B

PhidgetLED-64 Advanced

This Phidget uses current control to adjust the brightness of up to 64 LEDs.

307 in stock

$78.00

undefined
ID: 1046_0B

PhidgetBridge 4-Input

This board is needed to measure the output from a load cell. You can connect up to four load cells or strain gauges.

1000+ in stock

$90.00

undefined
ID: 1047_1B

PhidgetEncoder HighSpeed 4-Input

Read up to four encoders simultaneously with this Phidget. Includes 4 digital inputs for reading limit switches.

460 in stock

$75.00

undefined
ID: 1054_0B

Phidget FrequencyCounter

Measures the frequency of a signal and powers small devices like Hall Effect sensors, flow rate sensors, and tachometers.

115 in stock

$70.00

undefined
ID: 1055_0B

PhidgetIR

Send and receive IR data with this Phidget. It can learn and reproduce signals from common devices like your TV remote.

858 in stock

$45.00

undefined
ID: 1057_2B

PhidgetEncoder HighSpeed

Read one encoder at speeds of up to 500,000 quadrature cycles per second. Connects directly to USB.

207 in stock

$50.00

undefined
ID: 1062_1B

PhidgetStepper Unipolar 4-Motor

Accurately control up to 4 unipolar stepper motors with this controller. Connects to a USB port.

24 in stock

$50.00

undefined
ID: 1064_1B

PhidgetMotorControl HC

Control up to two DC motors with this controller. Monitors surges and overheating in the API and connects to a USB port.

203 in stock

$115.00

undefined
ID: 1065_1B

PhidgetMotorControl 1-Motor

Control one motor as well as an encoder and up to 2 analog and 2 digital sensors. Connects to a USB port.

1000+ in stock

$75.00

undefined
ID: 1066_1B

PhidgetAdvancedServo 1-Motor

Control one RC servo motor or actuator with this controller board. Powered solely by your computer via USB.

555 in stock

$35.00

undefined
ID: 1067_0B

PhidgetStepper Bipolar HC

Accurately control one bipolar stepper motor with this controller. This board comes with a number of safety features.

1000+ in stock

$90.00

1203_2B - PhidgetTextLCD 20X2 : White : Integrated PhidgetInterfaceKit 8/8/8
ID: 1203_2B

PhidgetTextLCD 20X2 : White : Integrated PhidgetInterfaceKit 8/8/8

A Phidget InterfaceKit with a 2-line by 20-character White Backlit LCD Display.

192 in stock

$70.00

undefined
ID: 1204_0B

PhidgetTextLCD Adapter

A dual channel LCD controller that is compatible with HD44780 LCD modules.

284 in stock

$30.00

undefined
ID: 3051_1B

Dual Relay Board

This board has 2 SPDT mechanical relays rated at 210W for DC or 1750VA for AC.

1000+ in stock

$17.00

undefined
ID: 3052_1

SSR Relay Board 2.5A

Rated for 28VAC/2.5amp or 40VDC/2.5amp switching, this SSR is controlled by a digital output.

1000+ in stock

$15.00

3053_0 - Dual SSR Relay Board
ID: 3053_0

Dual SSR Relay Board

Switch 2 SSRs rated for 28VAC/9amp or 40VDC/9amp using digital outputs.

994 in stock

$30.00

3054_0 - SSR Relay Board 0.5A
ID: 3054_0

SSR Relay Board 0.5A

Rated for 28VAC/0.5amp or 40VDC/0.5amp switching, this SSR is controlled by a digital output.

1000+ in stock

$10.00

undefined
ID: REL2001_0

Relay Phidget

Use a VINT port with this relay to switch power to a circuit running at up to 210 watts DC or 1750 volt-amperes AC.

1000+ in stock

$10.00

undefined
ID: REL2002_0

Signal Relay Phidget

Switch a small digital signal with this DPDT mechanical relay Phidget. Switch up to 60W of DC power or 125 VA of AC power.

1000+ in stock

$12.00

undefined
ID: REL2103_0

Solid State Relay Phidget

This solid state relay module can switch up to 30V and 10A AC or DC using a port on your VINT Hub.

1000+ in stock

$15.00

undefined
ID: 3950_0

DC Solid State Relay - 30V 50A

This SSR switches up to 30VDC/50amp and connects to a PhidgetInterfaceKit 0/16/16 or OUT1100.

258 in stock

$20.00

undefined
ID: 3951_0

DC Solid State Relay - 50V 80A

This SSR switches up to 50VDC/80amp and connects to a PhidgetInterfaceKit 0/16/16 or OUT1100.

424 in stock

$25.00

undefined
ID: 3952_0

DC Solid State Relay - 30V 100A

This SSR switches up to 30VDC/100amp and connects to a PhidgetInterfaceKit 0/16/16 or OUT1100.

465 in stock

$30.00

undefined
ID: 3953_1

AC Solid State Relay - 280V 20A Zero-Cross Turn-on

This SSR switches up to 280VAC / 20A and connects to a PhidgetInterfaceKit 0/16/16 or OUT1100.

770 in stock

$15.00

undefined
ID: 3955_0

Small Heatsink for SSR

Use this heatsink to run one SSR at full current switching capacity without overheating.

227 in stock

$5.50

undefined
ID: 3958_0

DC Solid State Relay - 120V 75A

This SSR switches up to 120VDC / 75A and connects to a PhidgetInterfaceKit 0/16/16 or OUT1100.

182 in stock

$45.00

undefined
ID: 3961_0

Large Heatsink for SSR

Use this heatsink to run one high current SSR without overheating.

59 in stock

$18.00

undefined
ID: 3962_0

AC Solid State Relay - 280V 20A Random Turn-on

This SSR switches up to 280VAC / 20A and connects to a PhidgetInterfaceKit 0/16/16 or OUT1100.

930 in stock

$15.00