This connector can be attached to any J-type thermocouple by securing the exposed wires into the screw terminals, allowing for simple, solderless connectivity with other thermocouple wires. When you connect your thermocouple wires to either end of this adapter, make sure that you match it so that wires of the same polarity are connected. If you do not, you may experience incorrect sensor data.
| Physical Properties | |
|---|---|
| Thermocouple Type | J-Type |
| Length | 65.8 mm |
| Width | 25.4 mm |
| Height | 12.6 mm |
| Customs Information | |
| Canadian HS Export Code | 9025.19.00 |
| American HTS Import Code | 9025.19.80.85 |
| Country of Origin | CN (China) |
Thermocouples cannot easily be soldered, since adding an additional metal junction will throw off the readings. The following products will help connect or extend thermocouple wires.
$5.00/Piece
This connector is designed to connect to any J-type thermocouple. We don't currently have any J-type thermocouples available.