Products for USB Sensing and Control

Products for USB Sensing and Control

Small Heatsink for SSR

ID: 3960_0
Use this heatsink to run one low current SSR without overheating.

Discontinued

Replaced by the 3955, a similarly sized heatsink.

Medium and high current (>5A) SSRs can generate a lot of heat during operation. Failure to manage the generation of heat by the SSR during switching may damage the SSR and lead to product failure. When using an SSR this problem of heat dissipation must be managed. It is very important to select an adequate heatsink if you plan on using your SSR at its maximum specifications. To assist with heat dissipation, a thermal pad (packaged with all "hockey puck" type SSRs we sell) should be used between the relay and the heatsink. For very high performance applications, air cooling may also be necessary.

This small heatsink is recommended to be used with relays switching loads of up to 15A.


Comes Packaged with


  • Mounting Screws (2)

Product Specifications

Heatsink
Manufacturer Part Number KH060-50
Screw Thread Size M4
Weight 235 g