Acrylic Enclosure for the 1046 - Discontinued - 3808_2

Acrylic Enclosure for the 1046 - Discontinued

ID: 3808_2

This clear acrylic enclosure protects your Phidget and is assembled with a Phillips screwdriver.

Discontinued

Replaced by the 3854 - Plastic Shell Enclosure for the 1046

The 3808 Enclosure is designed to protect the Rev 0 version of the 1046 – PhidgetBridge while giving you access to all terminals and connectors through openings in the enclosure.

You can plug and unplug cables, connect and disconnect devices, without having to open the enclosure.

This particular revision of the enclosure has thicker tabs for increased durability.

Note: The Phidget board is not included with the enclosure and must be purchased separately.

Package Includes

6 clear acrylic pieces
Mounting Hardware (Nuts, bolts, spacers)

Required Tools

Small Phillips screwdriver

Warning

Be careful when tightening the mounting screws as too much tension could crack the acrylic.

Product Specifications

Physical Properties
Fits Board Revision	0
Material	Clear Acrylic
Thickness	3.2 mm
IP Rating	20
Customs Information
Canadian HS Export Code	8473.30.00
American HTS Import Code	8473.30.51.00
Country of Origin	CN (China)

Phidgets

This enclosure is desgined to fit the following Phidgets. See the "Resources" tab for assembly instructions.

ID: 1046_0B

PhidgetBridge 4-Input

$90.00

error: syntax error at or near "order"

sales inquiries

quotes, distributor information, purchase orders

technical inquiries

support, advice, warranty, returns, misshipment

website inquiries

corrections or suggestions

Address

Unit 1 - 6115 4 St SE
Calgary AB T2H 2H9
Canada