Replaced by the 3804_1 - Acrylic Enclosure for the 1018
The 3804 Enclosure is designed to protect the Rev 2 version of the 1018 – PhdgetInterfaceKit 8/8/8 while giving you access to all terminals and connectors through openings in the enclosure.
You can plug and unplug cables, connect and disconnect devices, without having to open the enclosure.
Note: The Phidget board is not included with the enclosure and must be purchased separately.
|Fits Board Revision||2|
|Be careful when tightening the mounting screws, as too much tension could crack the acrylic.|