Products for USB Sensing and Control
Products for USB Sensing and Control

Acrylic Enclosure for the SBC

ID: 3817_2

This clear acrylic enclosure protects your Phidget and is assembled with a Phillips screwdriver.

Discontinued

The 3817 Enclosure is designed to protect the Rev 0 version of the 1072 – PhidgetSBC2 or 1073 – PhidgetSBC3 while giving you access to all terminals and connectors through openings in the enclosure.

You can plug and unplug cables, connect and disconnect devices, without having to open the enclosure.

This particular revision of the enclosure comes pre-assembled.

Note: The Phidget board is not included with the enclosure and must be purchased separately.

Package Includes

  • 6 clear acrylic pieces
  • Mounting Hardware (Nuts, bolts, spacers)

Required Tools

  • Small Phillips screwdriver

Phidgets

This enclosure is desgined to fit the following Phidgets. See the "Resources" tab for assembly instructions.

Product Specifications

Physical Properties
Fits Board Revision 0
Material Clear Acrylic
Thickness 3.2 mm
IP Rating 20
Customs Information
Canadian HS Export Code 8473.30.00
American HTS Import Code 8473.30.51.00
Country of Origin CN (China)

Warning


warning Be careful when tightening the mounting screws, as too much tension could crack the acrylic.

Documents