Products for USB Sensing and Control
Products for USB Sensing and Control


Unit 1 - 6115 4 St SE
Calgary AB  T2H 2H9
+1 403 282-7335

Acrylic Enclosure for the 1018

ID: 3804_3
This product will not be produced again, and will be discontinued once it runs out of stock. It is being replaced by the 3852, which comes standard with new 1018s.

This clear acrylic enclosure protects your Phidget and is assembled with a Phillips screwdriver.


Quantity Available: 13

Qty Price
5 $8.08
10 $7.65
25 $6.80
50 $5.95
100 $5.53
250 $5.10
500 $4.68
1000 $4.25

The 3804 Enclosure is designed to protect the Rev 2 version of the 1018 – PhdgetInterfaceKit 8/8/8 while giving you access to all terminals and connectors through openings in the enclosure.

You can plug and unplug cables, connect and disconnect devices, without having to open the enclosure.

This particular revision of the enclosure comes pre-assembled.

Note: The Phidget board is not included with the enclosure and must be purchased separately.

Package Includes

  • 6 clear acrylic pieces
  • Mounting Hardware (Nuts, bolts, spacers)

Required Tools

  • Small Phillips screwdriver


This enclosure is desgined to fit the following Phidgets. See the "Resources" tab for assembly instructions.

Product Specifications

Physical Properties
Fits Board Revision 2
Material Clear Acrylic
Thickness 3.2 mm
IP Rating 20


warning Be careful when tightening the mounting screws, as too much tension could crack the acrylic.


Product Physical Properties
Image Part Number Price Material
3804_3 $8.50 Clear Acrylic