Quantity Available: 452
The 3803 Enclosure is designed to protect the Rev 1 version of the 1017 - PhidgetInterfaceKit 0/0/8 while giving you access to all terminals and connectors through openings in the enclosure.
You can plug and unplug cables, connect and disconnect devices, without having to open the enclosure.
This particular revision of the enclosure comes pre-assembled.
Note: The Phidget board is not included with the enclosure and must be purchased separately.
This enclosure is desgined to fit the following Phidgets. See the "Resources" tab for assembly instructions.
|Fits Board Revision||1|
|Be careful when tightening the mounting screws, as too much tension could crack the acrylic.|