Replaced by the 3855_0 - Plastic Shell Enclosure for the 1048
The 3810 Enclosure is designed to protect the Rev 0 version of the 1048 – PhidgetTemperatureSensor 4-Input while giving you access to all terminals and connectors through openings in the enclosure.
You can plug and unplug cables, connect and disconnect devices, without having to open the enclosure.
Note: The Phidget board is not included with the enclosure and must be purchased separately.
This enclosure is desgined to fit the following Phidgets. See the "Resources" tab for assembly instructions.
| Physical Properties | |
|---|---|
| Fits Board Revision | 0 |
| Material | Clear Acrylic |
| Thickness | 3.2 mm |
| IP Rating | 20 |
| Customs Information | |
| Canadian HS Export Code | 8473.30.00 |
| American HTS Import Code | 8473.30.51.00 |
| Country of Origin | CN (China) |
|
Be careful when tightening the mounting screws, as too much tension could crack the acrylic. |
